Alpine iLX-W690D - Setting the Bluetooth Device; Deleting a Bluetooth Device from the List; Apple Carplay Setup

19-EN
4 Touch [ ] (Audio) or/and [ ] (Hands-free)
of the device you want to connect from the
list.
Audio: Device is used as an Audio device.
Hands-free: Device is used as a Hands Free Device.
• You can register up to 5 Bluetooth compatible mobile
phones.
• You can connect 1 Bluetooth Device to each of
Bluetooth Audio mode and Hands-free mode.
• The Bluetooth registration process differs depending on the
device version and SSP (Simple Secure Pairing). If a 4 or 6
character Passcode appears on this system, enter the Passcode
on the Bluetooth device.
• If a 6 character Passkey appears on this device, make sure the
same passkey is displayed on the Bluetooth compatible device
and touch [OK].
• If all 5 devices have been registered, you cannot register a 6th
device. To register another device, you need to delete one of
the other 5 devices first.
Setting the Bluetooth Device
Select one of 5 paired Bluetooth compatible devices that
you previously registered.
Touch [
] (Audio) or [ ] (Hands-free) of the
device you want to connect from the Paired
Device list.
• You can also change the connected device by touching the
device name.
Deleting a Bluetooth Device from the
list
You can delete the information of a previously connected
Bluetooth compatible device.
1 Touch [
] of the Bluetooth compatible
device to delete from the Paired Device list.
2 Touch [Yes].
• Touching [No] will cancel the setting.
Setting the Auto Connection
You can connect the last connected device automatically.
Set “Auto Connect” to [On] (
).
Apple CarPlay Setup
[Apple CarPlay] is selected on the Connection Setup Menu
screen.
To use the Apple CarPlay (page 29), set “Apple CarPlay” to
[On].
Setting item:
Apple CarPlay
Touch [
] (Off) or [ ] (On) of “Apple
CarPlay”.