Alpine INE-NAV-38 - Car Specific Sound Setup (EASY SETUP) (INE-Z928 HD;INE-NAV-38 Only); Settings When Switching Users

27-EN
8 Select the material of the car seats.
The settings confirmation screen is displayed.
• If the car seats are made of both leather and fabric, select [Half
leather].
9 Check the settings and touch [OK].
• If Preset3 was already saved for Time Correction/X-OVER/
Parametric EQ, the data will be overwritten.
• The Easy sound settings are reflected in the following Audio Setup
items.
Setting the MX (Media Xpander)
- Adjusting the Parametric Equalizer Curve (Parametric EQ)
Adjusting the Time Correction (Time Correction)
Adjusting the Crossover Settings (X-OVER) (only when
Subwoofer is set to “On”)
The Equalizer Presets (Bass Max EQ) settings are disabled.
Downloaded Sound Settings
Using a USB memory device, the sound settings downloaded from the
ALPINE website can be used to configure Time Correction, X-OVER
and Parametric EQ settings.
Setting item: Downloaded Sound Settings
The file name of download data shall be “A_U*****.MP3.”
• Save the setting data in the root folder.
• For details about procedures of download, see ALPINE’s web site.
1 Touch [Downloaded Sound Settings].
Setting data files are displayed in a list with a maximum of 5
items.
2 Touch the desired file.
3 Touch [OK].
The downloaded setting values are set as the Time
Correction/X-OVER/Parametric EQ settings, and at the
same time saved as Preset3, respectively.
• When no USB memory is connected, the “iPersonalize Setting”
function is not available.
• If Preset3 was already saved for Time Correction/X-OVER/
Parametric EQ, the data will be overwritten.
Simply by selecting a car type from the list registered to the INE-
Z928HD/INE-NAV-38, the audio environment that is most appropriate
to the car type is automatically set.
1 Touch [EASY SETUP].
The car type selection screen is displayed.
2 Touch your car type on the list.
3 Touch [OK].
The setup starts. When the message disappears, the setup
is complete.
• The Car Specific Sound Setup are reflected in the following Audio
Setup items;
- Setting the MX (Media Xpander)
- Adjusting the Parametric Equalizer Curve (Parametric EQ)
- Adjusting the Time Correction (Time Correction)
- Adjusting the Crossover Settings (X-OVER) (only when
Subwoofer is set to [On])
The Equalizer Presets (Bass Max EQ) settings are disabled.
Settings When Switching Users
The functions/settings that are affected when switching users are as
shown below.
*
1
Except i-Personalize Setup
*
2
The display pattern can be set when a camera equipped with a switch
function on the Camera screen is connected.
Extender (fixed)
Identifier (alphabet or number
5 letters maximum)
Header (fixed)
Car Specific Sound Setup (EASY SETUP)
(INE-Z928HD/INE-NAV-38 Only)
Item Ref. page
My Favorites User Registration 24
Setting My Favorites*
1
24
Displaying the Camera Image*
2
26
HD Radio/RBDS Displaying Radio Text 32
General Setup Setting Top banner and Bottom banner
Display
43
Switching the Display Color 44
Sound Setup Turning Subwoofer ON/OFF 47
Adjusting the Subwoofer Level 48
Source setup Source Layout Setting 53
Hands-Free
Phone Control
Assigning as a Short Cut Dialing
Number
67
Redial Function 66
Phone Book Function 66
Camera
Operation
Switching the Image Pattern for the
Rear Camera*
2
73
Switching the Image Pattern for the
Front Camera*
2
75
Guide Display ON/OFF Setting 73, 76
Adjusting the Caution Display Location 73, 76
Other Adjusting the Monitor Viewing Angle
(INE-Z928HD/INE-NAV-38 Only)
22