21-EN
01GB05INE-W957A.fm
ALPINE INE-W957A 68-24567Z47-A (EN)
User Registration
You can register up to two users. Configure the User1 and User2
settings for each user.
1
Press the (My Favourites) button.
The My Favourites screen is displayed.
• You cannot access My Favourites screen while driving.
2
Touch [Start].
The user name input screen for the first user is displayed.
• After registering the first user, touch [USER2] to access to
USER2’s registration screen.
• Touching [Skip] registers the user name as “USER1” or
“USER2” and no BLUETOOTH device is registered. In this
case, the users will not be switched automatically.
• Touching [Cancel] or pressing the (My Favourites) button
returns to the original screen without registering a user.
3
Input the user name from the keypad and touch
[OK].
The BLUETOOTH Device Setup screen is displayed.
• Touch [ ] to edit the name.
For details of how to input characters from the keypad, refer to
“How to Input Characters and Numbers (Keypad)” (page 27).
4
Touch [Link], then touch [OK].
The BLUETOOTH Device List is displayed.
• The BLUETOOTH devices registered here are used to
automatically identify the user.
Also, a cellular phone can be used as a hands-free phone.
For details, see “BLUETOOTH Setting” (page 56).
• Touching [Do not Link] exits user registration without
registering a BLUETOOTH device.
5
Touch [Search].
The system starts searching for BLUETOOTH devices.
When the search is completed, the BLUETOOTH Device
List is displayed.
• Set the BLUETOOTH setting on the preregistered
BLUETOOTH device side to [ON].
6
Touch a registered BLUETOOTH device and touch
[OK].
My Favourites screen for USER1 or USER2 is displayed.
• You can edit My Favourites icons.
For details of how to add, edit, delete or set My Favourites
icons, refer to “Adding My Favourites” (page 22).
7
Press the (My Favourites) button.
The My Favourites screen is exited and the display returns
to the original screen.
01GB00INE-W957A.book Page 21 Monday, April 21, 2014 7:49 PM
To Next Page
Loading...
