EasyManua.ls Logo

Alpine INE-W960A - Setting the Passcode; Selecting the Output Speaker; Adjusting the Caller Volume; Adjusting the Microphone Level

Alpine INE-W960A
180 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42-EN
01GB04INE-W960E.fm
ALPINE INE-W960A/INE-W960E INE-W960E_OM (EN)
Setting the Passcode
[Pass code Change] is selected on the BLUETOOTH setup menu in
step 3.
Refer to “BLUETOOTH Setup Operation” (page 41).
You can set the code for connecting with a BLUETOOTH compatible
device.
Setting item: Passcode Change
1
Touch [Passcode Change].
A numeric keypad screen is displayed.
2
Enter a 4-digit passcode, and then touch [Enter].
The initial number is 0000.
For details on how to input the numeric keypad, refer to “Numeric
Keypad Input Operations” (page 21).
Selecting the Output Speaker
[Phone Speaker] is selected on the BLUETOOTH setup menu in step
3.
Refer to “BLUETOOTH Setup Operation” (page 41).
You can select which speaker in the car will output the audio from the
phone.
Setting item: Phone Speaker
Setting contents: ALL (Initial setting) / FRONT L / FRONT R /
FRONT LR
The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
Adjusting the Caller Volume
[Caller Volume] is selected on the BLUETOOTH setup menu in step 3.
Refer to “BLUETOOTH Setup Operation” (page 41).
You can adjust the receive volume, during the call.
Setting item: Caller Volume
Setting contents: 1 to 11 (Initial setting: 5)
Adjusting the Microphone Level
[Microphone Level] is selected on the BLUETOOTH setup menu in
step 3.
Refer to “BLUETOOTH Setup Operation” (page 41).
You can adjust the transmit volume, during the call.
Setting item: Microphone Level
Setting contents: 1 to 11 (Initial setting: 5)
Adjusting the Ring Tone Volume
[Ring Tone Volume] is selected on the BLUETOOTH setup menu in
step 3.
Refer to “BLUETOOTH Setup Operation” (page 41).
You can adjust the volume of the incoming call.
Setting item: Ring Tone Volume
Setting contents: 1 to 11 (Initial setting: 5)
ALL: The sound is output from all speakers in car.
FRONT L: The sound is only output from the front left speaker.
FRONT R: The sound is only output from the front right
speaker.
FRONT LR: The sound is output from the front left and front
right speakers.
01GB00INE-W960E.book Page 42 Wednesday, November 19, 2014 5:31 PM

Table of Contents

Related product manuals