Alpine INE-W990BT - Hands-Free Phone Control

ALPINE INE-W990BT INE-W990BT_QRG (EN)
9-EN
EN
DE
FR
ES
IT
SE
NL
RU
PL
al)
the
Owner’s manual BLUETOOTH Setting, BLUETOOTH Operation
Hands-Free Phone Control
Hands-free calls are possible when using an HFP (Hands-Free Profile) compatible mobile phone with the INE-
W990BT.
How to connect to a BLUETOOTH
compatible device (Pairing)
The BLUETOOTH function is always available on this unit.
You can, therefore, search for a BLUETOOTH device for pairing at
any time.
1 Touch [Setup] icon of Top banner.
[SETUP] icon
2 Touch [ (BLUETOOTH)].
3 Touch [Set Bluetooth Device].
4 Touch [Search] of “No Device.”
5 Touch [Audio], [Hands-free] or [Both] of the
device you want to connect from the list.
Audio: Sets for use as an Audio device.
Hands-free: Sets for use as a Hands Free Device.
Both: Sets for use as both an Audio device
and Hands Free Device.
6 When the device registration is complete, a
message appears and the device returns to
normal mode.
You can register up to 3 BLUETOOTH compatible
mobile phones.
The BLUETOOTH registration process differs depending
on the device version and SSP (Simple Secure Pairing). If
a 4 or 6 character Passcode appears on this device, enter
the Passcode using the BLUETOOTH compatible device.
If a 6 character Passkey appears on this device, make
sure the same passkey is displayed on the BLUETOOTH
compatible device and touch “Yes.”
Answering a Call
1 An incoming call triggers the ringtone and
an incoming call display.
2 Touch [ ] or press (Phone) button.
The call starts.
Hanging up the Telephone
1 Touch [ ].
The call finishes.
Muting the Speech Volume
You can temporarily lower the microphone level to 0.
1 Touch [ ] during a conversation.
During the mute mode, is highlighted. Touch
again to cancel the mute mode.
•
•
n
ing of
wards
r at least
on button
ch screen
s
on button
d.