Alpine INE-W990BT - Getting Started

ALPINE INE-W990BT INE-W990BT_QRG (EN)
3-EN
EN
DE
FR
ES
IT
SE
NL
RU
PL
Owner’s manual Touch operation, Location of Controls, Turning Power On or Off
Getting Started
Touch operation
You can operate the system by using the touch panel on the screen.
Common onscreen buttons
: Returns to the previous screen. Depending on the function, this button may cancel the operations
performed on the screen.
: Closes the window.
Location of Controls
e
DER
EL OR
etc., and
Failure
al
product.
ine Service
XPERTS.
ical skill
here you
HEM
r than
securely
e resulting
INCHED
e seat rails)
mage to the
grommet
dge of the
URE OR
moisture
esult in
A c (Eject) button
Ejects a disc.
B
/ (UP/DOWN) button
Press to adjust the volume.
C MUTE/C button
Press to activate /deactivate the mute mode.
Press and hold for at least 3 seconds to turn the power
off.
D
(Phone)/VOICE CTRL. button
Recalls the Telephone Menu screen.
When a voice dial compatible hands-free phone is
connected, press and hold for at least 3 seconds to
switch to the Voice Dial screen.
E
/ button
This action varies according to the Audio/Visual source.
(Track Up/Down, Fast reverse/Fast forward, etc.)
F
/ button
Each time you press this button, the Navigation mode
and the Audio/Visual Source mode are changed
alternately.
Press and hold for at least 3 seconds to activate the
Quick Sound screen.
For details of navigation operations, refer to “Navigation
System OM” in the CD-ROM.
G DISC Slot
H RESET switch
The system of this unit is reset.
I Remote Sensor
Point the remote control transmitter towards the
remote sensor within a range of 2 metres.