39-EN
01GB05IVAD511E.fm
ALPINE IVA-D511E 68-14470Z65-A (EN)
You can select a mode suitable for the subject image.
• To return to the initial setting, after selecting any one of the setting
contents (Night M. to Contrast) and adjusting a desired brightness,
picture tint, etc., set this function to OFF.
• If your desired brightness, picture tint, etc., are adjusted after
selecting any one of the setting contents (Night M. to Contrast),
“Custom” is displayed.
Setting item: Bright
Setting content: –15 ~ +15
You can adjust the brightness between MIN (–15) and MAX
(+15). When it reaches the minimum or maximum point, the
display shows “MIN” or “MAX” respectively.
• When any Visual EQ Preset is selected, the brightness is
automatically adjusted according to the car’s interior lighting as
long as Auto is set in “Setting the Brightness of the Backlighting”
(page 37).
Setting item: Color
Setting content: -15 ~ +15
You can adjust the colour between MIN (–15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
• Colour adjustment can be made only in the iPod video, DVD, Video
CD, AUX modes.
• Colour adjustment cannot be made if a Navigation system with the
RGB feature is connected.
Setting item: Tint
Setting content: G15 ~ R15
Adjust the colour from G15 to R15. “G MAX” or “R MAX” is
displayed at the maximum of each colour.
• Tint adjustment can be made only in the iPod video, DVD, Video CD,
AUX modes.
• Tint adjustment cannot be made if a Navigation system with the RGB
feature is connected.
• When the picture from the external input is set to PAL, you cannot
adjust the Tint.
Setting item: Contrast
Setting content: -15 to +15
Adjustment of contrast is done in the range of -15 to +15. “HIGH”
and “LOW” appear as the maximum and minimum values
specified.
Setting item: Sharp
Setting content: -5 to +5
Picture quality adjustment range is -5 to +5. “SOFT” and “HARD”
appear as the minimum and maximum values specified.
• Picture quality adjustment can be made only in the iPod video, DVD,
Video CD, AUX modes.
• Picture quality adjustment cannot be made if a Navigation system
with the RGB feature is connected.
You can store the settings made for “Adjusting Image Brightness, Tint,
Colour, Picture Quality and Contrast.”
Setting item: User Memory
Setting content: P-1 / P-2
1 After completing “Adjusting Brightness, Tint, Colour,
Sharpness and Contrast” (page 39), touch [] or [] of
User Memory and then select preset number “P-1” or
“P-2” to which the settings are to be stored.
2 After selecting a preset No., touch [Memory].
The adjusted Visual EQ mode is stored by the above
operations.
• You can recall the Visual EQ mode stored here from P-1 or P-2 of
“Selecting the Visual EQ Mode (Factory’s setting)” (page 39).
Selecting the Visual EQ Mode (Factory’s
setting)
Setting item: Visual EQ
Setting contents: OFF (FLAT) / Night M. / Soft / Sharp / Contrast /
P-1 / P-2
OFF (FLAT): Initial Setting
Night M.: Suitable for movies in which dark scenes
frequently appear.
Soft: Suitable for CGs and animated films.
Sharp: Suitable for old movies where images are not
clearly shown.
Contrast: Suitable for recent movies.
P-1: Recalls the Visual EQ mode being stored on
preset No.P-1 from “Storing Visual EQ” (page 39).
P-2: Recalls the Visual EQ mode being saved on
preset No.P-2 from “Storing Visual EQ” (page 39).
Adjusting Brightness
Adjusting Colour of Picture
Adjusting Tint of Picture
Adjusting Image Contrast
Adjusting Picture Quality
Storing Visual EQ
01GB00IVAD511E.book Page 39 Friday, February 5, 2010 9:49 AM
To Next Page
Loading...
