44-EN
01GB05IVAD511E.fm
ALPINE IVA-D511E 68-14470Z65-A (EN)
Outputs the picture/Sound of the source selected on the IVA-D511E
connected to the rear monitor.
Setting item: AUX Out
Setting content: ON / OFF
Setting item: BLUETOOTH IN
Setting contents: OFF / Adapter
• For details on BLUETOOTH operation, refer to the Owner’s Manual
of the BLUETOOTH INTERFACE.
• If mobile phone compatible with the Voice-Dial function is
connected, the Voice-Dial function can be used.
To connect an audio processor using the optical digital output, set to
“ON” by the following procedure.
Setting item: Optical Out
Setting contents: OFF / ON
• Afterwards, set ACC to OFF once, then turn it ON again. The setting
of Digital Output is decided.
You can input the audio of an external device, (such as a Portable audio
player) to the BLUETOOTH interface connector of this unit. A special
Conversion cable (KCE-237B) is necessary to adapt the BLUETOOTH
interface connector as an AUX IN.
A portable music device and a BLUETOOTH INTERFACE
(KCE-400BT) cannot be connected to the BLUETOOTH interface
connector at the same time.
Setting item: AUX+ IN
Setting contents: OFF / ON
• When OFF is selected, the settings related to AUX+ cannot be
changed from this unit.
After setting to ON in “Setting the AUX+ Mode”, this setting can be
carried out.
Setting item: AUX+ Level
Setting contents: Low / High
Setting item: Illumi Color
Setting content: Blue / Red
Setting the Picture/Sound Output
ON: The “Rear” item is displayed on the Source Selection
screen.
Touch [Rear] to change to the REAR select screen, then
touch the desired source. The selected source picture is
output on the rear monitor.
OFF: The “Rear” item is not displayed on the SOURCE select
screen.
Setting the BLUETOOTH Connection
(BLUETOOTH IN)
OFF: Select to ignore any external interrupts.
Adapter: Select when an optional BLUETOOTH INTERFACE
is connected.
When an external interruption occurs, the display
changes to the Telephone screen.
Setting the Digital Output
Setting the AUX+ Mode
OFF: AUX+ source is not displayed.
ON: AUX+ source is displayed.
Setting the AUX+ Level
Low: Decreases the external input audio level.
High: Increases the external input audio level.
Changing the Lighting Colour of Buttons
Blue: Lighting colour is blue.
Red: Lighting colour is red.
01GB00IVAD511E.book Page 44 Friday, February 5, 2010 9:49 AM
To Next Page
Loading...
