30-EN
Setting Top banner and Bottom banner
Display
[Top/Bottom Banner Fade Out] is selected on the General setup menu
in step 3. Refer to “General Setup Operation” (page 28).
You can configure the display setting for the Top banner and Bottom
banner for the audio/visual source.
Setting item: Top/Bottom Banner Fade Out
Setting contents: Off (Initial setting) / Top / Top and Bottom
Screen/LED Customize
[Screen/LED Customize] is selected on the General setup menu in step
3. Refer to “General Setup Operation” (page 28).
The illumination control adjusts the brightness of the backlighting based
on the car ambient lighting for easier viewing.
Setting item: Dimmer
Setting contents: Auto (Initial setting) / On / Off
• When “Auto” or “On” is set, the setting is also applied for the button
lighting in “Adjusting the Dimmer of Button Lighting at Night”
(page 30).
You can adjust the brightness of the backlight. This function could be
used, for instance, to change the screen brightness while travelling at
night.
Setting item: Screen Dimmer Level
Setting content: -15 to +15 (Initial setting: 0)
You can adjust the level between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
You can adjust the brightness of the button lighting at night with the
dimmer.
Setting item: Key Illumination Level
Setting level: -2 to +2 (Initial setting: 0)
You can change the Display Colour or Wallpaper Image.
Copy the desired image file from a USB memory device to use on this
device.
• Copiable image files
- PNG (.png)/JPEG (.jpg)
- Max Resolution=4000x4000 pixel
1
Touch [Background Customize].
Display example for Background Setting main screen
Wallpaper File List in USB memory
• Built in Wallpaper Image File is “Alpine BG.”
Preview of selected file
Colour select switch
Switching the Display Colour
Setting Colour: Blue (Initial setting) / Light Blue / Turquoise /
Green / Red / Amber / Dark Yellow / White
2
Touch the desired colour select switch.
The Display Colour is changed. The changed Display
Colour will be reflected even if [OK] in the lower right of the
screen is not touched.
Switching the Wallpaper Image (Background)
2
Select the desired file from the Wallpaper File List.
The selected file is previewed.
3
Touch [OK].
The previewed image file is set as the Wallpaper Image.
• You cannot change the colour of the Wallpaper Image copied from a
USB memory device.
Off: Always displayed
Top : Top banner will fade out after 5 seconds if no
operations are performed.
Top and Bottom: Top banner and Bottom banner will fade out
after 5 seconds if no operations are
performed.
Setting the Brightness of the Backlighting
Auto: Adjust the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.
On: Keep the background illumination of the monitor dark.
Off: Deactivate Auto Dimmer mode to keep the background
illumination of the monitor bright.
Adjusting the Minimum Level of Backlight
Adjusting the Dimmer of Button Lighting at
Night
Switching the Display Colour and
Wallpaper Image (Background)
To Next Page
Loading...
