Alpine MRD-M300 User Manual

1
EspañolFrançais
English
R
•OWNER'S MANUAL
Please read this manual to maximize your enjoyment of the outstanding
performance and feature capabilities of the equipment, then retain the
manual for future reference.
•MODE D'EMPLOI
Veuillez lire ce mode d'emploi pour tirer pleinement profit des excellen-
tes performances et fonctions de cet appareil, et conservez-le pour toute
référence future.
•MANUAL DE OPERACIÓN
Lea este manual, por favor, para disfrutar al máximo de las excepciona-
les prestaciones y posibilidades funcionales que ofrece el equipo, luego
guarde el manual para usarlo como referencia en el futuro.
MRD-M500/MRD-M300
MONO POWER AMPLIFIER
CONTENTS
ACCESSORIES....................................................... 1
Introduction........................................................... 2
WARNING.............................................................. 2
CAUTION ............................................................... 3
INSTALLATION ...................................................... 4
CONNECTIONS ...................................................... 6
OPERATION METHOD ......................................... 11
IN CASE OF DIFFICULTY...................................... 18
SYSTEMS ............................................................ 19
SPECIFICATIONS ................................................. 20
ACCESSORIES
• End Cover........................................................... 1
• Terminal Cover ................................................... 1
• Bracket ............................................................... 2
• Hexagon Wrench ................................................ 1
• Self-Tapping Screw ............................................ 4
• Machine Screw................................................... 4
• Hexagon Screw .................................................. 2
• Double Face Tape ........................................ 1 SET
• Cushion ....................................................... 1 SET
• Insulation Tube (for Power Supply).................... 1
• Insulation Tube (for Speaker Output) ................. 1
• Speaker Input Connector (MRD-M300 Only) ........... 1
TABLE DES MATIERES
ACCESSOIRES........................................................... 1
Introduction............................................................... 2
AVERTISSEMENT ...................................................... 2
ATTENTION................................................................ 3
INSTALLATION .......................................................... 4
CONNEXIONS ............................................................ 6
METHODE DE FONCTIONNEMENT .......................... 11
EN CAS DE PROBLEME ............................................18
SYSTEMES ............................................................... 19
SPECIFICATIONS ..................................................... 20
ACCESSOIRES
• Couvercle d’achèvement........................................ 1
• Couvercle cache-bornes ........................................ 1
• Support ................................................................. 2
• Clé hexagonale ...................................................... 1
• Vis autotaraudeuse................................................ 4
• Vis à métaux.......................................................... 4
• Vis à six pans ........................................................ 2
• Ruban adhésif double face ............................. 1 JEU
• Coussin .......................................................... 1 JEU
• Tube d’isolation (pour alimentation) ...................... 1
• Tube d’isolation (pour la sortie de haut-parleur) ..... 1
• Connecteur d’entrée de haut-parleur
(MRD-M300 uniquement) ........................................ 1
ÍNDICE
ACCESORIOS ........................................................ 1
Introducción .......................................................... 2
ADVERTENCIA....................................................... 2
PRUDENCIA .......................................................... 3
INSTALACIÓN ........................................................ 4
CONEXIONES ........................................................ 6
MÉTODO DE OPERACIÓN.................................... 11
EN CASO DE DIFICULTAD ....................................... 18
SISTEMAS ............................................................ 19
ESPECIFICACIONES ............................................ 20
ACCESORIOS
• Cubierta de acabado ........................................... 1
• Cubierta de terminales ....................................... 1
• Soporte .............................................................. 2
• Llave hexagonal.................................................. 1
• Tornillo autorroscante ........................................ 4
• Tornillo para metales .......................................... 4
• Tornillo hexagonal .............................................. 2
• Cinta de doble cara................................. 1 JUEGO
• Almohadilla ............................................ 1 JUEGO
• Tubo de aislamiento (para la alimentación) ........ 1
• Tubo de aislamiento (para la salida de altavoz) .. 1
• Conector de entrada del altavoz
(MRD-M300 solamente) ....................................... 1
Español
Français
English

Alpine MRD-M300 Specifications

General

Brand	Alpine
Model	MRD-M300
Category	Car Amplifier
Language	English

Summary

Installation and Mounting

Main Unit Installation

Step-by-step guide for physically mounting the amplifier unit.

Mounting End Covers

Instructions for attaching the cosmetic end covers to the main unit.

Mounting Terminal Cover

Procedure for attaching the cover to the terminal section of the unit.

Wiring and Connections

Audio Connections Overview

Details on connecting speaker outputs, RCA inputs, and power supply.

Wire Lead Connection Cautions

Important precautions for connecting wire leads to the amplifier terminals.

Amplifier Operation Modes

Mode 1: Input Mode Settings

Adjusting input level and selecting input mode for optimal signal matching.

Mode 2: Low Pass Filter Settings

Adjusting the low pass filter and its crossover frequency.

Mode 3: Subsonic Filter Settings

Adjusting the subsonic filter and its frequency for bass optimization.

Mode 4: Parametric EQ Settings

Adjusting frequency, width, and level for the parametric equalizer.

Mode 5: Bass Compensation Settings

Turning the bass compensation feature on or off for enhanced bass.

Mode 6: Time Correction Settings

Adjusting time delay for speaker signal alignment.

Mode 7: Phase Settings

Selecting the speaker phase (0° or 180°) for optimal sound.

Mode 8: Amplifier ID and Turn-On Delay

Setting amplifier ID for control and adjusting turn-on delay.

Mode 9: Safe Mode Settings

Enabling or disabling the safe mode to prevent speaker damage.

Mode 0: Memory Settings

Selecting modes for saving and recalling settings.

Troubleshooting and System Diagrams

In Case of Difficulty Guide

Guide to diagnose and resolve common problems like low volume or no sound.

System Configuration Diagrams

Visual guides for single and parallel speaker system setups.

Specifications and Service

Technical Specifications

Detailed technical data including power output, frequency response, and impedance.

Service Care and Support

Details on warranty, customer support, and important notices.