Alpine MRP-M200 User Manual

R
•OWNER'S MANUAL
Please read this manual to maximize your enjoyment of the outstanding
performance and feature capabilities of the equipment, then retain the
manual for future reference.
•MODE D'EMPLOI
Veuillez lire ce mode d'emploi pour tirer pleinement profit des
excellentes performances et fonctions de cet appareil, et conservez-le
pour toute référence future.
•MANUAL DE OPERACION
Lea este manual, por favor, para disfrutar al máximo de las
excepcionales prestaciones y posibilidades funcionales que ofrece el
equipo, luego guarde el manual para usarlo como referencia en el futuro.
MRP-M200
MONO POWER AMPLIFIER
CONTENTS
WARNING.................................................................. 2
CAUTION ................................................................... 3
INSTALLATION .......................................................... 4
CONNECTIONS .......................................................... 4
CONNECTIONS CHECK LIST...................................... 6
SWITCH SETTINGS ................................................... 7
SYSTEM DIAGRAMS ................................................. 8
SPECIFICATIONS ..................................................... 10
TABLE DES MATIERES
AVERTISSEMENT ...................................................... 2
ATTENTION................................................................ 3
INSTALLATION .......................................................... 4
CONNEXIONS ............................................................ 4
LISTE DE VERIFICATION DES CONNEXIONS............. 6
REGLAGES DE COMMUTATEUR ................................ 7
DIAGRAMMES DU SYSTEME .................................... 8
SPECIFICATIONS ..................................................... 10
INDICE
ADVERTENCIA........................................................... 2
PRUDENCIA .............................................................. 3
INSTALACION ............................................................ 4
CONEXIONES ............................................................ 4
LISTA DE VERIFICACION DE CONEXIONES ............... 6
AJUSTES DEL INTERRUPTOR................................... 7
DIAGRAMAS DEL SISTEMA ...................................... 8
ESPECIFICACIONES ................................................ 10
Español
Français
English

Alpine MRP-M200 Specifications

General

S/N Ratio	100dB
Crossover Type	Low Pass
Impedance	2 Ohms
Power Output (RMS)	200 Watts
CEA-2006 Power Output	200W x 1
Power Output @ 2 Ohms	200W x 1
Frequency Response	10 Hz - 300 Hz
Input Sensitivity	0.2V - 4V
Crossover Frequency	50Hz - 200Hz
Bass EQ	0dB - 12dB
Bass Boost	0dB - 12dB

Summary

Installation

Connections

Preventing External Audio Noise

Tips for preventing external noise interference with the audio system.

RCA Input Jacks

Connect main unit line out leads using RCA extension cables. Ensure correct channel pairing.

Speaker Output Terminals

Connect speakers observing correct output connections and phasing. Positive to positive, negative to negative.

Battery Lead

Connect yellow battery lead to vehicle's positive terminal. Add a 25A fuse close to the battery.

Remote Turn-On Lead

Connect to head unit's remote turn-on or power antenna lead (positive trigger).

Ground Lead

Connect black ground lead securely to a clean, bare metal spot on the chassis. Ensure good ground continuity.

Speaker Input Leads

Use for head units without preamp outputs. Connect to speaker output leads of head unit.

Connections Check List

Switch Settings

High-pass Output Phase Switch

Sets output phase to 0° or 180° independently for optimal sound alignment.

Crossover Frequency Adjustment Knob

Adjusts crossover frequency between 50 Hz and 200 Hz for optimal point.

Bass EQ Selector Switch

Activates the Bass EQ function for subwoofers when set to ON.

Bass EQ Adjustment Knob

Adjusts bass frequency level from 0 dB to +12 dB when Bass EQ is ON.

Input Gain Adjustment Control

Sets amplifier input gain to match head unit output for optimal sound without distortion.

System Diagrams

One Speaker System

Illustrates the wiring for a single speaker system setup.

Specifications

Service Care

Accessories

Lists included accessories and part numbers for replacement.