Alpine Power Beam PLM310T - User Manual

PLM310T
Power Beam
Set of 3, 10 Watt Lights w/
Transformer
Limited Warranty Information
Thank you for choosing an Alpine product! We aim to please with our wide range of products
including Fountains, Birdbaths, Statuary, and Pond Supplies & More. All of our products are
constructed from the highest quality materials. In the event that we have not achieved our usual
standard of excellence, we will repair or replace, at our discretion, within the warranty period. A valid
proof of purchase, with the purchase date clearly indicated, must be provided. Photos of defective
merchandise will also be required to help distinguish the actual cause of the defect. Please read
below for a detailed description of warranty coverage.
• Water Damage
Alpine products are not manufactured to withstand extreme temperatures. Improper storage
that allows water to freeze within a product may cause damage, is considered negligence,
and will not be covered under this warranty. The use of “hard water,” and/or caustic cleaners,
can affect the painted or other finishes. Failure to keep the unit clean, and use of such
additives/cleaners, will also void the warranty. Please note: for fountains, it is normal for
some splashing to occur and protecting the immediate surfaces is not the responsibility of
Alpine Corporation.
• Paint & Color (Retention and/or Loss)
The use of water will cause natural erosion to the color. This area can be touched up using
standard paint. The paint is designed to protect the entire finish against breakdown of
color. As with any product, all finishes with time will gradually fade and discolor. The
warranty will only cover against severe or complete fading, within the first year from date of
purchase, with the above exclusion.
• Procedure/Service
Should a warranty/claim be needed, you should contact the retailer from whom you
purchased the product. If that is not an option, you can contact Alpine Corporation at
www.alpine4u.com. When contacting Alpine Corporation, you must be prepared to show
proof of purchase, provide photographs and any other information needed to validate your
claim. This may be necessary to distinguish between a partial or complete replacement of
a defective product. The warranty does not cover any items with multiple parts; the
warranty will ONLY cover the individual component of the unit/item that may be
defective. Replacement parts can be made available to a consumer through the original
selling party, or an approved parts retailer. If this is not an option, contact our customer
service department. Item is covered under one year limited warranty from the date of
purchase. When requesting replacement parts due to a warranty claim after 30 days
of purchase, credit card information will be requested for shipping charges.
• Not Covered Under Warranty
The limited warranty will NOT cover cases of damages due to:
1. Damages caused in Transit
2. Inadequate care and/or neglect
3. Environmental and/or natural elements
4. Immersion in water, unless specified
5. Improper Installation/Storage and/or Maintenance
This warranty is void if the product has been damaged by accident, misuse, negligence, improper
installation and/or modifications have occurred. This includes any and/or all defects arising out of
freezing water damage, hard water damage, failure to keep the unit clean and free of harmful
additives such as bleach, chlorine, etc…. which affects the paint and/or parts. This warranty also
does not cover any additional charges or installation, removal, disposal and/or shipping costs or
consequential damage associated with any warranty claim.
3

Summary

Limited Warranty Information

Water Damage Exclusions

Alpine products are not manufactured to withstand extreme temperatures. Improper storage that allows water to freeze may cause damage.

Paint and Color Retention

Warranty covers severe or complete fading within the first year. Natural erosion or gradual fading is excluded.

Warranty Claim Procedure

Details how to contact for warranty claims, proof of purchase, and replacement parts. Covers one-year limited warranty.

General Warranty Exclusions

Lists damages not covered, including transit, neglect, environmental elements, immersion, and improper maintenance.

Product Operation and Safety

Transformer Operation Guidelines

Ensure correct voltage and wattage when using the provided transformer for safe operation.

Installation and Operation Steps

Connect the light to the transformer, plug into a 120V outlet, and verify input voltage matches local supply.

Maintenance and Troubleshooting

Instructions for changing bulbs/lenses, and troubleshooting common issues like no light or water ingress.

Safety Precautions and Warnings

Crucial safety advice including hot components, electrical shock risks, proper bulb types, and usage restrictions.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document describes the Alpine PLM310T Power Beam, a set of three 10-watt lights with a transformer, designed for both indoor and outdoor use, in or out of water.

Function Description

The Alpine PLM310T Power Beam set provides illumination using three 10-watt low voltage lights. These lights are designed to be versatile, suitable for various environments including gardens, ponds, and other decorative lighting applications. They must be operated with the included Alpine multi-light transformer to ensure correct voltage and wattage. The system is designed for easy setup, with connectors that plug into the transformer and screw tight. The lights are capable of being submerged in water, making them suitable for water features, but users should be aware of specific warnings regarding water intrusion and heat.

Important Technical Specifications

• Light Type: Low Voltage Power Beam™ Lights
• Quantity: Set of 3 lights
• Wattage per Light: 10 Watts
• Bulb Type: MR11 12 volt 10 watt halogen bulbs (replacement bulbs must be of this type)
• Voltage: Low voltage, operated with a transformer
• Power Source: 120-volt outlet (for the transformer)
• Usage Environment: Indoor or outdoor, in or out of water
• Transformer: Included, multi-light transformer (must be used with the lights)
• Warranty: One-year limited warranty from the date of purchase

Usage Features

• Versatile Placement: Can be used in various settings, including dry land or submerged in water, making them ideal for fountains, ponds, and landscape lighting.
• Easy Installation: The lights connect to the transformer via a plug-in connector with a screw-tight coupling, simplifying the setup process. The transformer then plugs into a standard 120-volt outlet.
• Color Lenses: The lights support the use of colored lenses, allowing users to change the light's color to suit their aesthetic preferences. These lenses can be easily swapped by removing the lens retainer.
• Transformer Requirement: The system explicitly requires the use of the provided Alpine multi-light transformer, ensuring compatibility and safe operation within specified voltage and wattage limits. Users are warned not to exceed the maximum wattage indicated on the transformer.
• Safety Precautions: The manual emphasizes handling the light from the base as the housing can become hot. It also warns against operating the lights with missing or damaged covers to prevent fire or electrical shock. The product is not tested or designed for use in swimming pools and hot tubs.

Maintenance Features

• Bulb Replacement: The MR11 12 volt 10 watt halogen bulbs are replaceable. The process involves unplugging the transformer, allowing the light to cool, removing the lens retainer by pushing and turning counter-clockwise, carefully removing the lens and ensuring the "O" ring stays in place, pulling out the socket, and replacing the bulb. The new bulb should be gently pushed into place, aligning the pins.
• Lens Replacement/Cleaning: Colored lenses can be changed by removing the lens retainer. When reassembling, it's crucial to ensure the "O" ring is correctly positioned in the groove of the Power Beam™ light and that the lens is flush with the front lip of the rubber seal to maintain a watertight seal. The cover must be placed correctly onto the slots and turned tightly clockwise until locked.
• Water Damage Prevention: Users are advised to inspect cords for damage before installation to reduce the risk of electrical shock. If water gets into any Power Beam™ light, it should be lifted out of the water, the lens removed, and the water emptied until dry.
• Paint and Color Maintenance: The manual notes that the use of water will naturally erode color over time, and finishes will gradually fade. Touch-ups can be done with standard paint. The warranty covers severe or complete fading only within the first year, excluding natural erosion.
• Cleaning: Keeping the unit clean is important. The use of "hard water" or caustic cleaners can affect finishes and is not covered under warranty. Failure to keep the unit clean and free of harmful additives like bleach or chlorine will void the warranty.
• Troubleshooting: If a light fails to illuminate, users should check if the light set is receiving power (by testing another appliance in the outlet), ensure the light bulb has not burned out, and check for water intrusion if the light was submerged.
• Warranty Service: For warranty claims, users should first contact the retailer where the product was purchased. If that's not possible, Alpine Corporation can be contacted via their website (www.alpine4u.com). Proof of purchase with the date, photographs of the defective merchandise, and other relevant information are required to validate a claim. The warranty covers only the individual defective component, not the entire unit if it has multiple parts. Replacement parts may be available, and shipping charges for parts requested after 30 days of purchase will require credit card information.
• Warranty Exclusions: The warranty is void if the product has been damaged by accident, misuse, negligence, improper installation, or modifications. This includes damage from freezing water, hard water, failure to keep the unit clean, or the use of harmful additives. Damages caused in transit, inadequate care/neglect, environmental/natural elements, immersion in water (unless specified), and improper installation/storage/maintenance are also not covered. The warranty does not cover additional charges for installation, removal, disposal, shipping, or consequential damage.

Alpine Power Beam PLM310T Specifications