Jeep
SPV-65-JLT v20200731 5/6
5 Use supplied template and mark area of each side
for soundbar cutting.
6 With a reciprocating air saw or preferred cutting
device, carefully cut following markings from Step
5. Be carefull on cutting depth. Failure to do so will
result in cutting through the soundbar.
Rear Soundbar Speaker Removal & Installation (2018-Up)
7 Fill the right and left speaker cavities using (1) of
the supplied polyfil sheets per cavity.
8 Plug in the speaker. Use the supplied replacement
bolts (not the OEM 5mm allen heads) and mount the
speaker in the bar.
To Next Page
Loading...
