Alpine TDM-7529T User Manual

TDN-7529T/F
TDM-7526T/W/F
Signal Generator | Dial Control | Test Point Adjustment
Adjust VR2003 for the waveform
Figure 9 98.1MHz
changing to maximum output.
98.1MHz, 72dB asetiag
Figure 10 | (Stereo1kHz, | 98.1MHz oie
Lch only)
Figure : Waveform of T.P.5 output.
98.1MHz, 72dB Sacits
Figure 10 (Stereo 1kHz, 98.1MHz aia
Rch only)
98.1MHz, 21dB
Figure 11. | (Mod. 400H2, Dev. | og sais TP.6
Figure 11 98.1MHz TP.7
40kHz, SK : ON, BK
: ON, DK : OFF)
2 TAPE PLAYER SECTION
(1) Connections
98.1MHz, 30dB
(Mod. OFF)
Stop the adjust VR2003 at this time.
Adjust VR2005 for Rech output to be
minimum and confirm Lch and Reh
output level difference is more than
25dB.
Stereo
Separation
Adjustment
(Reh)
Proceed same adjustment under step
5 by alternating Lch and Rech.
Adjust L501 for Maximum Waveform
at T.P.6.
SK Adjustment
(O, @)
98.1MHz, 21dB
(Mod. 400Hz, Dev.
40kHz, SK : ON, BK
: ON, DK : ON)
Adjust VR501 for Maximum
Waveform at T.P.7.
DK Adjustment
(0, ®)
Test Tape
With 1KHz B.P.F. Figure 12
AC VTVM
Test Tape
Unit Under Test
Figure 13
-15-

Alpine TDM-7529T Specifications

General

Brand	Alpine
Model	TDM-7529T
Category	Car Receiver
Language	English