Alpine X009E-U - Editing an Alert Point

77
3.7 Editing an alert point
You can edit a previously saved or uploaded alert point (for example a
speed camera or a railway crossing).
1. Browse the map and select the alert point to edit. The red circle
appears around the alert point.
2. Tap .
3. Scroll down the list and tap .
4. On the newly opened screen, modify the type of the alert point, the
direction from which you expect the alert, or (if applicable) the speed
limit for this alert point.
5. Tap to save the changes to the alert point.
Alpine_X009E_B5.pdf 77 5/9/2014 14:22:25