Alpine X009E-U - Page 183

83
 : Results in a route with fewer turns and
no difficult manoeuvres. With this option, you can make your
software to take, for example, the motorway instead of a
series of smaller roads or streets.
 Vehicle types:
When creating a new vehicle profile, select one of the below
vehicle types.
 :
 Manoeuvre restrictions and directional constraints are
taken into account when planning a route.
 Roads are used only if access for cars is allowed.
 Private roads and resident-only roads are used only if
they are inevitable to reach the destination.
 Walkways are excluded from routes.
 :
 All manoeuvres are available in intersections.
 Directional constraints are taken into account the way
that opposite direction is allowed with a low speed.
 A private road is used only if the destination is there.
 Walkways are excluded from routes.
 :
 Manoeuvre restrictions and directional constraints are
taken into account when planning a route.
 Roads are used only if access for buses is allowed.
 Private roads, resident-only roads and walkways are
excluded from routes.
 :
 Manoeuvre restrictions and directional constraints are
taken into account when planning a route.
 Roads are used only if access for taxis is allowed.
 Private roads, resident-only roads and walkways are
excluded from routes.
Alpine_X009E_B5.pdf 83 5/9/2014 14:22:25