40
3.1.6 Entering coordinates
To select a destination by entering its coordinates, perform the following steps:
1. Press the navigation hardkey button to access the Navigation menu.
2. Tap .
3. You can enter the latitude and longitude values in any of the following formats: decimal degrees,
degrees and decimal minutes, or degrees, minutes and decimal seconds. Tap
.
(optional) If necessary, tap then and enter the
coordinate in UTM format.
4. The route is calculated and the map appears showing the entire route, where you can check route
information and route alternatives. Tap to modify the route parameters, or tap
to start your journey.
To Next Page
Loading...
