~CAUTION
This symbol means important instructions. Failure
to
heed them can result in injury or material
property damage.
HALT
USE
IMMEDIATELY
IF
A
PROBLEM
APPEARS.
Failure to
do
so may cause personal injury
or
damage to the product.
Return it to your authorized Alpine dealer
or
the nearest Alpine Service
Center for repairing.
HAVE
THE
WIRING AND INSTALLATION DONE
BY
EXPERTS.
The wiring
and
installation
of
this unit requires special technical skill
and
experience.
To
ensure safety, always contact the dealer where you
purchased this
product
to have
the
work done.
USE
SPECIFIED
ACCESSORY
PARTS
AND
INSTALL
THEM
SECURELY.
Be
sure to use only the specified accessory parts. Use
of
other
than
designated parts
may
damage this
unit
internally
or
may not securely
install
the
unit
in place. This may cause parts to become loose resulting
in hazards
or
product
failure.
ARRANGE
THE
WIRING
SO
IT
IS
NOT CRIMPED
OR
PINCHED
BY
A
SHARP
METAL
EDGE.
Route
the
cables
and
wiring away from moving parts (like the seat rails)
or
sharp
or
pointed edges. This will prevent crimping
and
damage to the
wiring.
If
wiring passes
through
a hole in metal, use a
rubber
grommet
to prevent the wire's insulation from being cut by the metal edge
of
the
hole.
DO NOT
INSTALL
IN
LOCATIONS
WITH HIGH MOISTURE
OR
DUST.
Avoid installing the
unit
in locations with high incidence
of
moisture
or
dust. Moisture
or
dust that penetrates into this
unit
may result in
product
failure.
I
3-EN
To Next Page
Loading...
