Do you have a question about the Alpkit Jaran 2 and is the answer not in the manual?
Thank you for purchasing the Alpkit Jaran backpacking tent. Please read, understand, and comply with all instructions and warnings.
Pitch inner first with minimum 6 pegs. Ensure ground is free from sharp objects and lay out groundsheet, pegging corners.
Assemble poles and lay them over the inner tent. Insert pole ends into sockets located at the corners of the inner.
Suspend the inner tent using poles. Attach the flysheet over the inner, matching colour-coded tabs.
Fasten toggles and velcro tabs around poles, hook corner tabs, and tension tent by adjusting buckles and guylines.
The tent is not fireproof, avoid flames/heat, do not cook inside, ensure ventilation, secure anchoring, and choose campsites wisely.
Clean and dry tent thoroughly after each use. Spot clean with mild detergent and warm water. Air dry only.
Use duct tape or StormSure for rips. Use a splint or pole sleeve for broken poles. Contact for professional repair.
Details material specifications for outer, inner mesh, panels, floor, poles, buckles, and zips.
Suggests washing, passing on, selling, donating, or recycling the product after use.
Product meets expectations upon delivery or within 3 years for repair, replacement, or refund, based on fault.
Contact Alpkit support via email (support@alpkit.com), phone (01773 417007), or website (www.alpkit.com/support).
| Capacity | 2 person |
|---|---|
| Season | 3-season |
| Doors | 2 |
| Vestibules | 2 |
| Water Column (Groundsheet) | 5000 mm |
| Flysheet Fabric | Ripstop polyester |
| Flysheet Waterproofing | 3000 mm |
| Poles | Aluminium |
| Water Column (Flysheet) | 3000 mm |
| Floor Fabric | Ripstop polyester |
Loading...