6. Locate the plastic clips of the inner canopy [Fig. 4] and connect
to the poles, connect the two circular plastic attachments
clip to the downward facing hubs.
Throw the flysheet over the inner, making sure that the door is
in the right place.
CARE AND MAINTENANCE
Clean and dry tent thoroughly after each use.
Never use a washing machine or tumble dryer to clean your
tent. Car washes are also frowned upon.
Spot clean with mild detergent and warm water.
Air dry only.
Pack tent carefully to avoid punctures.
Avoid prolonged UV exposure.
SPECIFICATION
Sleeps: Ordos 2: 2, Ordos 3: 3
Outer: 15d Nylon, Silicon face PU backer, ripstop
(HH: 3,000mm)
Inner mesh: 20d Nylon Breathable ripstop
Floor: 20d Nylon, Silicon face PU backer, ripstop (HH: 3,000mm)
Poles: 7001-T6 alloy
Pegs: 14 pegs, Alpkit Candy Canes
CONTINUE THE JOURNEY
When your partnership with this product is over please don’t
leave it hidden in a cupboard, never to see another adventure.
Wash it, pass it on, give to a friend, sell it, donate it to charity,
make it into something else or recycle it and let someone else
live their dream.
FIELD REPAIRS
If you are unlucky enough to rip your tent, duct tape or
StormSure tough tape will do the trick for field repairs.
When you are home and dry, you can repair your tent
properly. Using the Spares kit you can patch up your tent
with more fabric. Remember to seal any seams!
If a pole breaks, use a pole splint or sleeve as a temporary
repair.
If you need any help of spare parts then please get in touch
and we will find a fix for your tent.
In store service for your kit: alpkit.com/stores
For more ideas on how you can extend the life of or donate
your outdoor products visit: alpkit.com/continuum
HACK, PATCH & SEW
7.
(4)
(5)
Fasten the toggles to the sockets above each door [Fig. 5] and
the velcro tabs around the poles, hook the plastic corner tabs.
Tension the tent by adjusting the buckles at the pegout points,
peg and tension the guylines as required.
8.
9.
HAPPY
CAMPING!
To Previous Page
Loading...
