EasyManua.ls Logo

ALSA Alsatom SU-MPC SU50 - Technical Data; Technical Features and Specifications; Environmental and Atmospheric Conditions; Currents and Power Output Tables

ALSA Alsatom SU-MPC SU50
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UM_AlsSUMPC(50_100_140)_EN_1.0_11-17.docx 8 / 14
TECHNICAL DATA ----------------------------------------------------------------------------------------------
Technical features
Generator: Electronic type, compliant with IEC 601-2-2 standards and suitable for monopolar and bipolar usesl
Working frequency: Monopolar/bipolar working frequency 440kHz +- 10%.
Generator PER: 97%.
Classification: (CE2007/47= IIB) (IEC= Class I - Type CF) (EMC= Cat. A).
Output circuit: “floating” insulated from earth at high/low frequencies and protected against the use of the defibrillator.
Supply, absorption and fuses: See the data label on the back.
Intended use: Up to ≤2000mt, in environment with pollution degree = Cat II, with a supply network with overvoltage = Cat 2.
Enclosure IPN
3
N
2,
= Protected against the ingress of solid objects ≥ 2,5 mm and against water drops when tilted up to 15°.
Foot-switch IPN
6
N
7
= Protected against both the dust and effects of a momentary immersion in water.
Cooling: By convection without fan.
Activation signals Cut (yellow light and grave sound), Coagulation ( blue light and acute sound)
Operation control: By microprocessor
Self-test system: By microprocessor with self-checks and ERROR CODES
Neutral electrode (single area and double area) control: Specific circuit with power delivery block and alarm signals.
Supply cord: 2meters, section 3x0,75 mm
2
.
Dimensions and weight: cm (WxDxH) 22x24x12 – about Kg 4.5
Environmental and atmospheric conditions for use, transport and storage
For the use: Temperature (°C) +10 ÷ +40. Humidity 30% ÷ 75%. Pressure (hPa): 700 ÷ 1060.
For the transport and storage: Temperature (°C) -40 ÷ +70. Humidity 10% ÷ 95%. Pressure (hPa): 500 ÷ 1060.
Currents and Powers
W: Power (Watts) - : Rated load
Vpp: Open circuit peak to peak voltage - CF: Crest factor – M: Modulation - DT: Duty Cycle
SU50-MPC SU100-MPC
Pure
80 W
500
Vpp 980 - CF 1.5 - M 0% - DT 100%
Pure
160 W
500
Vpp 1000 - CF 1.5 - M 0% - DT 100%
P
PULSED
40 W Vpp 1350 - CF 3 - M 50% - DT 100%
P
PULSED
80 W Vpp 1360 - CF 3 - M 50% - DT 100%
Blend
80 W Vpp 1400 - CF 2.3 - M 0%, DT 80%
Blend
140 W Vpp 1400 - CF 2.3 - M 0%, DT 80%
B
PULSED
1
40 W Vpp 1550 - CF 3.5 - M 50%, DT 80%
B
PULSED
1
70 W Vpp 1550 - CF 3.5 - M 50%, DT 80%
B
PULSED
2
33 W Vpp 1580 - CF 3.6 - M 50% - DT 80%
B
PULSED
2
38 W Vpp 1580 - CF 3.6 - M 50% - DT 80%
Micro
80 W Vpp 1530 - CF 3.4
M 0% - DT 50%
Micro
80 W Vpp 1530 - CF 3.4
M 0% - DT 50%
M
PULSED
80 W Vpp 1530 - CF 3.4
M 0% - DT 50%
M
PULSED
80 W Vpp 1530 - CF 3.4
M 0% - DT 50%
Ful
g
75 W
750
Vpp 2250 - CF 3.5 - M 0% - DT 50%
Ful
g
100 W
750
Vpp 2300 - CF 3.5 - M 0% - DT 50%
F
PULSED
40 W Vpp 2300 - CF 5 - M 50% - DT 50%
F
PULSED
40 W Vpp 2300 - CF 5 - M 50% - DT 50%
Bi
p
olar
80 W
100
Vpp 500 - CF 2.8 - M 0% - DT 100%
Bi
p
olar
100 W
100
Vpp 500 - CF 2.8 - M 0% - DT 100%
SU140-MPC
Pure
140 W
500
Vpp 1000 - CF 1.5 - M 0% - DT 100%
P
PULSED
80 W Vpp 1380 - CF 3 - M 50% - DT 100%
Blend
140 W Vpp 1400 - CF 2.3 - M 0%, DT 80%
B
PULSED
1
70 W Vpp 1550 - CF 3.5 - M 50%, DT 80%
B
PULSED
2
38 W Vpp 1580 - CF 3.6 - M 50% - DT 80%
Micro
90 W Vpp 1530 - CF 3.4
M 0% - DT 50%
M
PULSED
90 W Vpp 1530 - CF 3.4
M 0% - DT 50%
Ful
g
120 W
750
Vpp 2300 - CF 3.5 - M 0% - DT 50%
F
PULSED
60 W Vpp 2300 - CF 5 - M 50% - DT 50%
Bi
p
olar
100 W
100
Vpp 500 - CF 2.8 - M 0% - DT 100%

Related product manuals