Alstom FKG1X - Page 112

Installation
Removing (Re
-
-
install) the co
vers of enclosure
for
interve
ntion
G31
-
-0
80EN05
5/10
06--2012
© ALSTOM 2010. All rights reserved. Informat
ion contained in
this document is indicative only.
No representation or warranty is given or
should be
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
provided without liabili
ty and
is subject to
change without notice. Reproduction, use or disclosure to
third parties, without express writt
en authority, is
strictly prohibited.
 GRID
Disass
embly covers with
cooling system,
continued (If applicable).
Removal of
the covers
A
– Remove
the cover
plates and
the seals
betwee
n
the half
covers,
B – Remove the crown from the gasket ring
C -- Remove the half covers from the enclosure.
.
A
.
C
x6
HM8--30
HM8
x24
.
B
.
A
.
A
.
A
.
C
x8
x18
.
B
.
B
1
F
/
1
X
x6
x10
x16
x48
HM10--40
1
F
/
1
X
x40
1F/1X
x1
Removal of the
covers
(continued)
Remove the half--covers with the aid of lifting strap.
.
A
.
A
x
2
Continued on next page.