Alstom FKG1X - Page 259

End of equipment service life
Disma
ntling and
recov
ery of
compon
ents
from a circuit breaker
G80
-
-0
00EN02
2/6
02--2011
© ALSTOM 2010. All rights reserved. Informat
ion contained in
this document is indicative only. No
representati
on or
warrant
y is
given or should
be
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
provided without liabili
ty and
is subject to
change without notice. Reproduction, use or disclosure to
third parties, without express writt
en authority, is
strictly prohibited.
 GRID
I
-
-
Introduction
During the elimination phase for a High Voltage gas insulated circuit
breaker, at the end of its service life, the quality of the treatment of wastes
genera
ted
represe
nts
the
essen
tial
environ
mental aspect.
This manual proposes, for each element of a High Voltage gas insulated
circuit breaker, the recommended method of elimination for the various
materials it comprises, as well as any possible precautions to be taken.