GRID
High Voltage Switchgear
PS 0002EN
03 1996-03-18 2011-03-21 1 / 3
Sheet N° Revision 1st issue Revision date Page
SAFETY SHEET
HANDLING OPERATIONS
CAUSE OR ORIGIN OF HAZARD
.
Any handling operation may involve danger : - for the personnel,
-
for the equipment being handled,
-
for the installations or equipment in the vicinity.
WORK REQUIREMENTS.
As a general rule, handling operations must be carried out by personnel familiar with the basic
handling regulations, using equipment in good working order, and wearing the appropriate
protective clothing or equipment
.
Ensure that the condition of the cases is such that they can be safely handled (state of the wood,
shock-resistance, etc.).
SAFETY INSTRUCTIONS.
OBSERVE ALL GENERAL INSTRUCTIONS GOVERNING INSTALLATION, COMMISSIONING AND
OPERATION IN ACCORDANCE WITH CURRENTLY ACCEPTED PRACTICES AS WELL AS THOSE LAID
DOWN IN THE DOCUMENTATION SUPPLIED WITH THE EQUIPMENT.
To Next Page
Loading...
