Need help?Do you have a question about the Alstom MiCOM P127 and is the answer not in the manual?
General| Manufacturer | Alstom |
|---|---|
| Model | MiCOM P127 |
| Frequency | 50/60 Hz |
| Current Inputs | 1A or 5A |
| Outputs | Relay outputs |
| Display | LCD Display |
| Rated Voltage | 100-240 V AC |
| Protection Functions | Overcurrent, Earth Fault, Under/Over Voltage, Frequency Protection |
| Communication Protocols | IEC 60870-5-103, Modbus |
Explains password applicability, entry process, and factory default settings.
Details on how alarm and warning messages are displayed on the LCD and LEDs.
Details the types and quantities of analogue inputs for MiCOM P125, P126, and P127 relays.
Accessing and configuring operational parameters, including password entry.
Configuration options for currents, voltages, CT/VT ratios, and LEDs.
Displaying system measurement values like current, voltage, and energy.
Configuration for communication protocols like ModBus, Courier, IEC 60870-5-103, DNP3.
Configuration of various protection functions available on MiCOM relays.
Automation control functions, including trip commands, logic, and outputs.
Displaying stored data, events, disturbances, and monitoring signals.
Details on auxiliary power supply voltage ranges and connection terminals.
Details on the number, type, and assignment of logic inputs.
Details on RS485 rear and RS232 front communication ports.
To Next Page