RECORD CONTROL
Password protected window for “RECORD CONTROL’’ setting i.e. Clear
Events, Clear Maint, Clear Dist Rec, Clear Faults and Reset Thermal
State.
Press the Plus / up arrow key (+ /) to move to the next option.
COMMUNICATION
Password protected window for “COMMUNICATION’’ for setting RP1
Address, RP1 Time sync, RP1 Parity and RP1 Baudrate.
Press the Plus / up arrow key (+ /) to move to the next option.
GROUP 1
Password protected window for “GROUP 1’’ setting i.e. System
Configuration, Under Current Protection, Cold Load Pick-up, Thermal
Overload, Earth Fault and Over Current Protection.
Press the Plus / up arrow key (+ /) to move to the next option.
GROUP 2
Password protected window for “GROUP 2’’ setting i.e. System
Configuration, Under Current Protection, Cold Load Pick-up, Thermal
Overload, Earth Fault and Over Current Protection.
Press the Plus / up arrow key (+ /) to move to the next option.
SYSTEM DATA
Password protected window for “SYSTEM DATA’’ setting i.e.
Frequency, Com. Port and Password.
Press the Plus / up arrow key (+ /) to move to the next option.
VIEW RECORDS
This menu is to view Fault Records and Error logs
Press the Plus / up arrow key (+ /) to move to the next option.
MEASUREMENT
2.3.3 MEASUREMENT MENU
2.3.3.1 View contents
MEASUREMENT
Press the Minus / Right arrow key (- /) to view the Measurement
parameters.
To Next Page
Loading...
