To Next PageTo Next PageHow to fix an ALTA Indoor Furnishing shade that is not responding?
If your ALTA Indoor Furnishing shade isn't responding, it could be due to a depleted battery. Recharge it using a compatible USB 5V/2A (max) adapter and a micro USB cable. Alternatively, check the connection between the wand and the motor to ensure it's fully connected.
Why does my ALTA PowerWand shade only move in small steps?
If your ALTA Indoor Furnishing shade only moves in small increments when you press the button, it might be in Window Shadings/Dual Shades mode. Try switching it to Roller/Honeycomb mode. Also, ensure that the shade limits are properly set.
What to do if ALTA PowerWand Indoor Furnishing shade stops before reaching limit?
If your ALTA Indoor Furnishing shade stops before reaching its top or bottom limit, a favorite position might have been set. You may need to remove the set favorite position.
General| Brand | ALTA |
|---|---|
| Model | PowerWand |
| Category | Indoor Furnishing |
| Language | English |
Overview of different ways to mount the shade, including terminology for window casements.
Details on how to properly install mounting brackets, ensuring they are level for correct shade operation.
Instructions for screwing installation brackets into the top two holes for inside mounts.
Instructions for screwing standard brackets through two back holes for outside mounts.
Optional steps for positioning and mounting extension brackets for outward projection.
Optional method for attaching extension brackets to the side of the window frame.
Steps to attach the wand hanger and post to the shade's headrail and connect the control wire.
Procedure for tilting and snapping the shade's headrail into the installed brackets.
Instructions on how to gently pry brackets to release the shade headrail.
Basic commands to lower, raise, or stop the shade using wand buttons.
Guide to setting custom upper and lower limits for automatic shade movement.
Instructions on how to program and recall a preferred intermediate shade position.
Information on when and how to charge the shade's internal battery for proper operation.
Optional installation guide for securing the bottomrail to the window sill.
Steps to correct shade length or levelness using bottomrail adjustment screws.
Important warning regarding strangulation hazards from cords and recommended actions.
