Need help?Do you have a question about the ALTAI C1N Series and is the answer not in the manual?
General| Brand | ALTAI |
|---|---|
| Model | C1N Series |
| Category | Accessories |
| Language | English |
Guide to connecting the AP/CPE to your PC via wired or wireless.
Verify connectivity to the C1n Series AP/CPE using the 'ping' utility.
Steps to access and configure the device via a web browser interface.
Explains the use of a secondary IP address based on the Ethernet MAC address.
Overview of the web interface structure and navigation levels.
Instructions on how to safely exit the web administration interface.
Procedure to restart the C1n Series AP/CPE device.
Displays general system information, product name, CPU/memory usage, time, and uptime.
Details on Ethernet and Radio0 (2.4G/5G) interface status.
Presents historical data for system, Ethernet, and radio performance.
Configure system name, NTP settings, and historical statistics collection.
Set up network parameters including General, VLAN, DHCP, Port Forwarding, and Safe Mode.
Configure Radio0 settings for AP, Station, Repeater, and Bridge modes.
Manage administrator accounts and select login authentication types.
Process for upgrading or downgrading the device firmware.
Reset the device to factory settings via web GUI or reset button.
Backup or restore the device configuration settings.
Scan Wi-Fi channels to check noise floor, busy percentage, and AP density.
Perform network diagnostics like Ping and Traceroute.
Configure periodic reboots and log uploads for system maintenance.
To Next Page
