ALTAI C1N User Manual

Altai Technologies Ltd. All rights reserved
ALTAI C1N SERIES
WIFI AP/CPE
WEB-ADMIN
CONFIGURATION
MANUAL
Version 1.3
Date: January, 2016

ALTAI C1N Specifications

General

Brand	ALTAI
Model	C1N
Category	Accessories
Language	English

Summary

Getting Started with C1n Series AP/CPE

Check Network Access to C1n Series AP/CPE

Configure C1n Series AP/CPE via Web-Admin Interface

Monitor System Status and Information

System Status Details

View Interface Status (Radio and Ethernet)

Radio Interface Status

Information about Radio0 interface status in AP, Station, Repeater, Bridge modes.

Ethernet Interface Status

View Ethernet Interface Statistics

Access Historical Statistics for System and Network

View Ethernet Performance Statistics

Monitor Radio Performance Statistics

Access and Analyze System Logs

Analyze Panic Logs for System Errors

View Alarm Logs for System Events

System Configuration Procedures

Network Configuration

General Network Configuration

WLAN Setting (IPv4)

WLAN Setting (IPv6)

WAN/LAN Interface Assignment

LAN Setting (IPv4)

VLAN Configuration

DHCP Server Setup

Port Forwarding

Wireless Configuration

Radio0 AP Mode Configuration

Radio0 Station Mode Configuration

Radio0 Repeater Mode Configuration

Radio0 Bridge Mode Configuration

Wireless Security Settings

Configure security schemes like Open, WEP, WPA/WPA2, and ACL.

Thin AP Configuration

Administration Configuration Options

Firmware Update

Guides on upgrading or downgrading the C1n device firmware.

Factory Default Restore

Reset the system to factory default settings via web GUI or reset button.

Useful Tools for Network Management

Channel Scan and Analysis

Scan channels to gather info on noise floor, busy percentage, and AP count.

Network Diagnosis Tools

Perform Ping and Traceroute tests for network troubleshooting.

Watchdog Timer Functions

Schedule periodic reboots or log uploads using a watchdog timer.