ALTAI C1N - Port Forwarding

Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
1. Select Configuration ->Network ->DHCP
2. Select “Server Mode” in DHCP Server.
3. Click Submit
4. Click the icon “ ” under “Detail” column.
5. Check Enable Pool
6. Provide IP address range for leasing by filling IP addresses in both Start IP Address
and End IP Address respectively.
7. Set at least one DNS server’s IP address in DNS1, DNS 2, or DNS 3.
8. Configure lease time in Default Lease Time from 60 s to 60480s. The default value
is 86400s.
9. Click Submit
10. Click Save&Apply to apply
5.3.4. Port Forwarding
The Port forwarding service is only available at gateway mode. User may enable and
configure port forward via ConfigurationNetworkPort Forwarding. The function is
used to permit communications by external hosts with services provided within a
private local area network. User may specify the port forward setting by click the icon
“ ” under “Detail” column.