ALTAI C1N - Basic System Configuration

Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
Figure 5-5 Changes have been committed
6. The whole committing changes progress, it is no need to reboot C1n Series
AP/CPE.
5.2. Basic System Configuration
User may specify the basic system parameters via ConfigurationSystem. The
parameters include System Info Setting, Network Time Protocol (NTP) Setting, and
Historical Statistics Collection Setting.
Figure 5-6 NTP Setting
“System Info Setting” is used to set network management information.
System Name: Set system name of the device, the system name can be up to 255
characters long.
System NE ID: Set system NE ID, the system NE ID can be up to 64 characters long.
System Location: Set system location, the system location can be up to 255
characters long.
“NTP Setting” is used to set NTP (network time protocol) information. NTP is a network
time protocol for the C1n Series AP/CPE to synchronize the system time. If NTP is