ALTAI C1N - Wlan X (0-15) Rogue Station List

Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
4. Click Save&Apply to apply
Enable ACL function with “Enabled-Default Allow” in WLAN:
1. Select ConfigurationWirelessRadio0WLAN to edit “More…” behind the
WLAN, and then select WLAN Security to access to security configuration page
2. Select “Enabled-Default Allow” in Access Control List
3. Select suitable input method in ACL Input Method
4. Input MAC address in Denied MAC Address or upload a text file by pressing
“Upload File”
5. Click Submit
6. Click Save&Apply to apply
Enable ACL function with “Enabled-Default Deny” in WLAN:
1. Select ConfigurationWirelessRadio0WLAN to edit “More…” behind the
WLAN, and then select WLAN Security to access to security configuration page
2. Select “Enable-Default Deny” in Access Control List
3. Select suitable input method in ACL Input Method
4. Input MAC address in Allowed MAC Addressor upload a text file by pressing
“Upload File”
5. Click Submit
6. Click Save&Apply to apply
5.4.1.1.2.3. WLAN X (0-15) Rogue Station List
Rogue station stands for the devices that can potentially disrupt wireless networks and
can sometimes cause irrevocable damage to the network owners. C1n Series AP/CPE
supports Rogue Station List to prevent potential damages from rogue station; User
may input the rogue station’s MAC address into rogue station list, then this station
cannot associate to WLAN. User may manage the rogue station via
ConfigurationWirelessRadio0Rogue Station List.