ALTAI C1N - Wlan Configuration

Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
Configure radio0 as AP:
1 Select Configuration->Wireless->Radio0->General
2 Check Enable Radio.
3 Select to “AP” in Radio Mode
4 Select your country code in Country Code
5 Select desire wireless mode in Wireless Mode
6 Select operating channel in Radio Frequency
7 Set maximum transmit power in Transmit Power
8 Set the maximum number of users Radio0 serves in Maximum Clients
9 Check Enable Inter-WLAN User Isolation if necessary.
10 Check Periodic Auto channel Selection if necessary; please specify channel
selection time by either schedule or periodic if Periodic Auto channel Selection is
enabled.
11 Click Submit
12 Click Save&Apply to apply
5.4.1.1.2. WLAN Configuration
C1n Series AP/CPE radio0 supports maximum 16 WLANs, and they can be configured
separately. User may configure each individual WLAN via Configuration
Wireless Radio0 WLAN.