Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
1. Introduction
This manual is to summarize how to perform basic configuration for the Altai C1n
Series AP/CPE through web-admin interface. C1n Series AP/CPE includes 4 product
models: C1n, C1xn, C1an and C1xan. They are all single-band WiFi AP/CPE: C1n and
C1xn work at 2.4GHz band, C1an and C1xan work at 5GHz band.
2. C1n Series Model and Firmware Version
This manual is applicable for the following models, hardware and firmware versions:
Table 2-1 C1n Series Model
3. Getting Started
3.1. Setup Local Area Connection on Your PC
C1n Series AP/CPE can be connected to your PC in wired mode or in wireless mode.
In the following, wired mode will be introduced. This is because the configurations are
similar in wireless mode, except SSID has to be configured in both C1n Series AP/CPE
and PC.
C1n Series AP/CPE can be connected to your PC directly or by a switch or a hub.
Start Network Configuration on your PC.
For Windows XP user,
1. Click the “Start” menu and choose “Control Panel”.
2. Click “Network Connections”.
To Next Page
Loading...
