Altair AL-2163 User Manual (English)

Questions and Answers:

J
Jeremy HortonAug 3, 2025
What to do if Altair Lantern lights do not come on or flicker?
- U
  umitchellAug 3, 2025
  If your Altair Lantern lights don't turn on or flicker, there are several potential causes. It could be due to incorrect or loose wire connections, which can be resolved by accessing the outlet box and fixing the wire connections. Another possibility is that light from another source is shining onto the photocell; try eliminating the light source or moving the fixture to a different location.
E
eric17Aug 13, 2025
What to do if a fuse blows or a circuit breaker trips when the Altair Lantern light is turned on?
- D
  David SmithAug 13, 2025
  If a fuse blows or a circuit breaker trips when you turn on your Altair Lantern light, it's likely due to crossed wires or a power wire grounding out. To resolve this, access the outlet box and fix the wire connections.
T
TatianaJun 16, 2025
Where can ! find parts for repair ,

Altair AL-2163 Specifications

General

Brand	Altair
Model	AL-2163
Category	Lantern
Bulb Type	LED
Power Source	Battery
Water Resistance	IPX4
Material	Plastic
Modes	High, Low

Summary

Features and Specifications

Product Features

Highlights key attributes like easy installation, Energy Star certification, reliable LEDs, and replaceable LED driver.

Technical Specifications

Details dimensions, electrical requirements (120 VAC 60Hz), and wattage (13W). Notes: Not for use with dimmer or timer.

General Information and Support

Provides contact details for customer service, operating hours, and instructions to retain the manual and receipt.

Required Tools for Installation

Lists essential tools not included with the fixture, such as safety goggles, screwdriver, pliers, tape, and cutters.

Parts, Safety, and Preparation

Parts Identification

Illustrates and names all included parts for fixture assembly and mounting, emphasizing checking for missing components.

Safety Cautions

Advises on electrical connection standards (NEC) and the importance of turning off power at the circuit breaker.

Installation Preparation

Requires a pre-installed outlet box with 120 VAC power supply; advises contacting an electrician if none exists.

Assembly and Installation Guide

Fixture Assembly Steps

Guides on assembling the decorative arm, caps, and securing nuts to the main fixture body using provided hardware.

Mounting Bracket and Wiring

Details on attaching the mounting bracket to the outlet box and making wire connections (white to white, black to black, ground to ground).

Final Fixture Mounting and Sealing

Instructions for attaching the wall plate, securing the fixture, and applying caulk for weather protection and drainage.

Troubleshooting and Maintenance

Common Troubleshooting Scenarios

Addresses issues like lights not turning on, flickering, or staying on, providing probable causes and solutions.

LED Driver Replacement Procedure

Step-by-step guide for replacing the LED driver, including disconnecting power, removing parts, and connecting new wires.

Product Care and Cleaning

Recommends disconnecting power before cleaning and using a dry or damp cloth; advises against harsh chemicals.

Warranty and Compliance

Three Year Limited Warranty

Covers defects in material and workmanship for three years from purchase; excludes damage from misuse or improper installation.

FCC Disclaimer and Interference

States compliance with FCC rules for Class B devices, potential interference, and user measures to correct it.

Related product manuals

Altair AL-2167

22 pages

Altair AL-2163 User Manual

Table of Contents