Need help?Do you have a question about the Altec Lansing VS4221 and is the answer not in the manual?
General| Type | TV/Monitor speakers |
|---|---|
| Subwoofer frequency range | 40 - 160000 Hz |
| Number of satellite speakers | 2 |
| Satellite speakers RMS power | 8 W |
| Subwoofer dimensions (WxHxD) | 200 x 245 x 340 mm |
| Satellite speaker driver diameter | 3 \ |
| Satellite speaker frequency range | 160 - 20000 Hz |
| Surround speaker dimensions (WxHxD) | 115 x 118 x 262 mm |
| Audio output channels | 2.1 channels |
| Mid-range driver diameter | 28 mm |
| Subwoofer driver diameter (imperial) | 6.5 \ |
| Sensitivity | 98 dB |
| Frequency range | 40 - 20000 Hz |
| RMS rated power | 35 W |
| Signal-to-Noise Ratio (SNR) | 80 dB |
| Total Harmonic Distortion (THD) | 10 % |
Covers electrical shock risks, water exposure, and power cord safety guidelines for user protection.
Lists 16 essential safety guidelines for apparatus installation, operation, and maintenance.
Details coverage, period, exclusions, and how to obtain service.
Provides contact information for support and notes on FCC compliance.
Explains optimal placement for subwoofer and satellite speakers for best audio performance and magnetic shielding.
Guides on connecting speakers to subwoofer and audio sources like PC or consoles.
Details the steps for plugging in the AC power cord and turning the system on.
Explains how to adjust audio settings using the remote and satellite controls.
Describes system mute, factory reset, and headphone jack functionality.
Provides solutions for common problems like no LEDs, no sound, or low volume.
Addresses problems like crackling sound, distorted audio, and incorrect cable connections.
Offers solutions for electrical hum and radio interference affecting speaker performance.
Covers troubleshooting for subwoofer-related problems like low hum or distorted monitor effects.
To Next Page
