Altec Lansing VS2220 User Manual

Altec Lansing VS2220

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

User’s guide Guía del usuario

Mode d’emploi Guia do Usuário

V

S2220

Questions and Answers:

S
Scott WattsJul 30, 2025
What to do if there is no sound from Altec Lansing VS2220?
- T
  Thomas AndersonJul 30, 2025
  If you're not getting sound from your Altec Lansing Speaker System, there are several things to check: * First, ensure the AC power cord is properly connected to the wall outlet. * Then, make sure the volume isn't set too low by turning the VOLUME knob clockwise. * Also, verify the 3.5mm stereo cable is securely connected to the correct “line-out,” “audio-out,” or headphone jack on your audio source. * Finally, test the speakers with another audio device to rule out any issues with your original source.
H
hosarahAug 4, 2025
How to troubleshoot Altec Lansing VS2220 Speaker System when no LEDs are lit?
- J
  Joshua ClarkAug 4, 2025
  If no LEDs are lighting up on your Altec Lansing Speaker System, it indicates a power issue. Here's what you should do: 1. Ensure the system is powered on by turning the VOLUME knob on the right speaker until you hear a click. An LED should light up next to the knob. 2. Check that the AC power cord is securely connected to the wall outlet. 3. If you're using a surge protector, make sure it's switched on. 4. Test the wall outlet by plugging another device into it to confirm it's working.
D
davisrobinAug 10, 2025
Why is the sound distorted on my Altec Lansing VS2220 Speaker System?
- A
  Amanda CarsonAug 10, 2025
  Sound distortion in your Altec Lansing Speaker System can often be resolved with these steps: * First, lower the volume by turning the VOLUME knob counterclockwise. * Next, check your computer's operating system volume level and adjust the volume and balance levels to the center as a starting point. Then, fine-tune the volume using the speaker's volume control. * If using WAV files, try a different sound source like a music CD, as WAV files are often of poor quality.
A
Amanda KingAug 17, 2025
How to fix crackling sound from Altec Lansing VS2220 Speaker System?
- A
  Alicia WatsonAug 17, 2025
  A crackling sound from your Altec Lansing speakers can be due to a few things. Check all cables to ensure they are securely connected to the “line-out” or “audio-out” jack on your sound card or audio source, and not the “speaker-out” jack. Also, the volume level in your computer operating system might be set too high, so decrease it if needed. You can also test with an alternate audio source to identify the cause.
D
Denise GreenAug 22, 2025
What to do if Altec Lansing VS2220 Speaker System has radio interference?
- T
  tracy67Aug 22, 2025
  If your Altec Lansing speakers are experiencing radio interference, it might be because they are too close to a radio tower. Try moving your speakers around until the interference disappears.

Altec Lansing VS2220 Specifications

General

Speaker Type	2.1 Speaker System
Frequency Response	40 Hz - 20 kHz
Color	Black
Input Connections	3.5mm stereo
Signal-to-Noise Ratio	70 dB
Inputs	1 x 3.5 mm Aux Input
Controls	Volume Control
Driver Size	5.25 inches (Subwoofer), 3 inches (Satellites)

Summary

Safety Precautions

General Safety Warnings

Critical warnings about electric shock, fire, moisture, and proper usage.

Power Cord Connection and Use

Instructions for connecting and using the power cord safely.

Comprehensive Safety Guidelines

Detailed list of operating instructions and safety advice.

Warranty and Support

One-Year Limited Warranty

Outlines the warranty coverage, terms, and limitations for the product.

Customer Support Resources

Information on obtaining assistance, contact details, and website resources.

VS2220 System Overview

Product Description

Introduction to the Altec Lansing VS2220 two-piece powered audio system.

Box Contents

Lists all items included in the product package.

Setup and Connections

Placing Satellite Speakers

Recommendations for optimal placement of satellite speakers for best sound.

Making Connections

Step-by-step guidance on connecting the system to audio sources.

PC Audio/Gaming/DVD Connection

Specific instructions for connecting to PC sound cards for audio and gaming.

Console Gaming Connection

Instructions for connecting to game consoles using a Y-Adapter.

Portable Audio Connection

Guidance for connecting portable audio devices like MP3 players.

Operation Controls

Powering On/Off

Steps to turn the speaker system on and off, including LED indicator.

Volume Control

How to adjust the master volume using the dedicated knob.

Tone Control

How to adjust the treble using the secondary control knob.

Headphone Usage

Instructions for connecting headphones and how it mutes the speakers.

System Specifications

Troubleshooting Guide

No LEDs or Sound Issues

Solutions for when no LEDs are lit or when there is no sound from speakers.

Audio Quality Problems

Troubleshooting steps for crackling sound and distorted audio.

Radio Interference

Guidance on resolving issues caused by radio frequency interference.

Related product manuals

Preview: Altec Lansing VS2221

Altec Lansing VS2221

Preview: Altec Lansing VS2421

Altec Lansing VS2421

Preview: Altec Lansing VS2621

Altec Lansing VS2621

Preview: Altec Lansing VS2121

Altec Lansing VS2121

Preview: VS2421 - QUICK CONNECT CARD

VS2421 - QUICK CONNECT CARD

Preview: Altec Lansing VS3251

Altec Lansing VS3251

Preview: Altec Lansing VS4121

Altec Lansing VS4121

Preview: Altec Lansing VS4221

Altec Lansing VS4221

Altec Lansing VS1520

Preview: Altec Lansing VS-3121

Altec Lansing VS-3121

Preview: Altec Lansing BXR1220

Altec Lansing BXR1220

Preview: Altec Lansing BXR1121

Altec Lansing BXR1121