EasyManuals Logo

Altech ECLIPS Series User Manual

Altech ECLIPS Series
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
25
INSTRUCTIONS ECLIPS
CONTENTS
Installing and positioning
Using for the rst time
Operating instructions
Fuels
Tips
Maintenance
Faults
Warranty conditions
Supplementary information Eclips Gourmet,-Depot, -Consol or -Motiv
INSTALLING AND POSITIONING
Properties Eclips and varieties -Gourmet, -Depot, -Complet, -Consol and -Motiv.
Type: soapstone stove
Use: discontinue combustion of wood.
Nominally and space heating capacity up to: 9kW
Mass: 190kg
Flue gas ow: 9,5g/s
Flue gas temparature: 210°C
Local regulations
Your Altech stove must be positioned in accordance with the locally applicable (legal)
regulations including all national and European applying requirements and building
regulations. Your Altech dealer can advise you on this.
Flue
The ue must have a minimum inner diameter of 150 mm and has to meet the local and
building regulations. The draught of the ue must have a nominal value of between 10
Pa and 15 Pa. Your dealer can check this for you. It is recommended to be tted with a
suitable bypass valve. If the door of the stove is equipped with the associated closing
spring the stove has been arranged for shared chimney canals.
In case of a chimney re; close the air valve of the stove, extinguish the re in the stove
with sand or soda and warn the re brigade, try never to extinguish the re with water.
Connecting piece
The connection between the stove and the chimney must be well sealed without hindering
the smoke or making it dif cult to sweep the chimney.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Altech ECLIPS Series and is the answer not in the manual?

Altech ECLIPS Series Specifications

General IconGeneral
BrandAltech
ModelECLIPS Series
CategoryStove
LanguageEnglish