Visit our website at www.fantomskateboard.com for replacement parts and technical support.6
Distinguish the + (positive) and – (negative)
polarity carefully when inserting the four AAA
batteries (1.5V/pc). Polarity markings are
called out on the inside of the remote housing.
Before You Start
WARNING: Remove all packing and items from the display box. Make sure that
the power switch is turned “OFF” before charging the skateboard.
- Allow up to 12 hours for the initial charge (see page 7 for charging information).
REMOTE CONTROL BATTERY INSTALLATION
Reset Button
Remote Control Batteries
Battery Charger
(Included)
Reset ButtonCharging Port
On/Off Switch
-
+ + + +
+
- - - -
To Next Page
Loading...
