Altice Labs XSR150DX - User Manual

ALTICE LABS MANUAL
XGS-PON FGW User Manual
XSR150DX
Document Version V2.3.0 | March 2022

Summary

FCC NOTICE

RF Exposure Statement

Details RF exposure limits and safe operation distances for user compliance.

Compliance with FCC requirement 15.407(c)

Explains transmitter operation based on FCC rules and automatic transmission discontinuation.

Summary

Technical Description

Main Functionalities

Lists the primary broadband services supported by the XGS-PON Fiber Gateway.

Application Scenario

Illustrates a typical in-home networking setup for XGS-PON FTTx architectures.

Interoperability

Details compliance with ITU-T and Broadband Forum standards for multi-vendor OLT interoperability.

Interfaces

Describes the types and quantities of physical interfaces on the equipment.

General Features

Explains the basic architecture and function of PON networks and the Fiber Gateway.

General Architecture

Presents the fundamental system architecture of the Fiber Gateway.

PON

Details the specific XGS-PON optical interface characteristics and connector type.

Ethernet

Explains Ethernet standards and physical interface types used by the Fiber Gateway.

Voice

Covers VoIP specifications, codecs, and voice interface provisioning.

Wi-Fi

Details Wi-Fi compliance, features, interfaces, security, and antennas.

Wi-Fi Easy Mesh

Explains the gateway's role as a WLAN controller for EasyMesh Wi-Fi extenders.

Multiple QoS per VLAN

Describes the support for Quality of Service (QoS) prioritization per VLAN.

Policing;Rate Limiting

Details downstream QoS, upstream QoS, Dynamic Bandwidth Allocation, and QoS scenarios.

General Specifications

Optical Interfaces

Details the characteristics of 10GE BASE-X and XGS-PON optical interfaces.

Ethernet Interfaces

Describes 10/100/1000BASE-T and 10GE interfaces, including 10GE BASE-X specifics.

FXS Interfaces

Lists the specifications for the Foreign Exchange Station (FXS) interfaces used for voice/fax.

Wi-Fi interfaces

Summarizes the specifications for the Wi-Fi interfaces, including standards, data rates, and security.

General Features

Provides a summary of the general features and port types of the XGS-PON Fiber Gateway.

Optical metering

Explains the gateway's capability to measure and report downstream optical power.

Wavelength filtering

Describes the WDM filters that enable coexistence with other PON technologies.

XGS-PON characteristics support

Lists the mandatory characteristics supported for XGS-PON according to ITU-T standards.

Standards

Details the EMC, Radio, and Safety standards the equipment complies with.

Setup

Equipment Connectivity

Details the location and type of connectors on the Fiber Gateway.

Equipment buttons

Describes the function and location of the physical buttons on the Fiber Gateway.

Fiber Gateway Status LEDs

Explains the status and meaning of the LEDs on the Fiber Gateway.

Typical Fiber Gateway usage scenario

Illustrates a typical home network connection scenario for triple play services.

Before installing the Fiber Gateway equipment

Covers safety warnings, environmental conditions, powering, and wireless installation best practices.

Fiber Gateway Setup

Outlines the materials required for installing the Fiber Gateway based on the network scenario.

Network Provider Connection

Details the connection process to the network provider, including optical patchcords.

Mains connection and power up

Guides on connecting the power supply and turning on the equipment.

Configuration

Fiber Gateway Activation

Describes the process for activating the equipment on a PON network.

Costumization

Covers customization requirements and software download procedures.

Troubleshooting

Troubleshooting Procedures

Provides solutions for common problems based on equipment LED status.

Altice Labs XSR150DX Specifications

General

Device Type	Gateway
Model	XSR150DX
Ethernet Ports	4
WAN Ports	1
USB Ports	1
Power Supply	12V DC
Wi-Fi Standard	802.11ac
Wi-Fi	Dual Band
Security Protocols	WPA2
PON	GPON
Voice	Yes