Altigen IP 705 - LCD Messages

36 IP 705 Manual
Call Record Allows a programmable
key to be used for on-
demand recording.
• From AltiAdmin/ACM Admin, go
to AltiGen IP Phone
Configuration on the
Management Menu, go to the
desired extension, and set the
appropriate function key to Call
Record.
• Go to the Extension
Configuration screen, General
page. In the Call Recording
Options field, select Record on
Demand to Extension VM or
Record on Demand to Central
Location.
• User presses the key to start
recording, presses the key again to
stop recording. There is no pause
function. When the call is
recording, the light is on.
• Recorded conversations can then
be played back through voice mail
or accessed at a centralized
location.
Conference
button
Initiates a conference and
adds in other parties one at
a time.
• Single Call Waiting, Multiple Call
Waiting or Live Call Waiting must
be enabled in AltiAdmin/ACM
Admin in order to conference
incoming calls.
• The user who initiates the
conference call can select another
conference member’s call and drop
it from the conference by
disconnecting the call. The feature
is unavailable to all other
conference members, even when
the conference initiator hangs up.
Workgroup
Status
Displays the workgroup
status in the LCD.
• From AltiAdmin/ACM Admin, go
to AltiGen IP Phone
Configuration on the
Management menu, go to the
desired extension, select IP 705
tab, and check the Display
Workgroup Status checkbox.