Altigen IP 705 - Firewall Considerations

Firewall Considerations
42 IP 705 Manual
Firewall Considerations
If using a firewall in the AltiWare environment, the following network
ports are used:
Headset • Headset RJ-9 port
Important: Contact AltiGen for the most current list of certified
headsets.
The pin outlet for headset support is:
Pin 1 (Tx-), Pin 2 (Rx1), Pin 3 (Rx2), Pin 4 (Tx+)
Note: If using Plantronics H91N or H101N headsets, a separate
Plantronics cable should be used and must be ordered
separately (part # 27190-01) in order to plug in these
headsets to the headset port.
Dimensions • (HxWxD) 8.23 x 8.74 x 1.65 in (209 x 222 x 42 mm)
Power • External power, 5VDC, 1.5A
• PoE option
Client Server TCP UDP
AltiAdmin
a
AltiWare DCOM 135 135
AltiConsole AltiLink + 10025
AltiControl AltiLink+ 10025
AltiReach AltiLink 10015
AltiView/AltiAgent AltiLink+
VM Service
10025
10028
Supervisor AltiLink+
Internal/External CDR
Logger
10025
10027
CDRSearch AltiLink+
Internal/External CDR
Logger
10025
10027
10029
TAPI Client TAPI Gateway 10026
IP 705 AltiGen IP Phone Service 10032
VoIP H.323/H.225
GateKeeper
VoIP H.323/H.225 1720
1718, 1719
VoIP Message
Waiting
VoIP Message Waiting 49151