16 17
morE
On the main menu, tap on the More icon to enter and
change the following settings:
rESEt: Reset all settings to the factory state.
PowEr off: Turn the watch o.
aBoUt: Display the watch’s Bluetooth name, hardware
address and software version.
watch facE
You can change the watch face on the Da Fit app.
Go to the watch faces menu on the app, tap on the
desired design and the watch will now display the
selected face.
SEt alarm
You can set alarms on the Da Fit app and synchronise to
the watch. On the app, turn alarm on and set the time.
You can set up to 3 alarms. The watch will vibrate during
the set alarm.
troUBlEShootinG
ProBlEm SolUtion
Weather function
is not working
• Ensure your smart watch is
connected to the Da Fit app.
• Ensure you have Wi-Fi/Mobile
data internet connection
• Ensure your smartphone’s
location/GPS setting is on.
• Manually set the city on the Da
Fit app.
Heart rate/Blood
pressure/Blood
oxygen function is
not working
• The smart watch has good
contact with your wrist.
• Check that the sensor is clean
and there is no dirt or debris
covering it.
• It may take over 30 seconds
before the rst result is shown
on the screen.
To Next Page
Loading...