EasyManua.ls Logo

Alto-Shaam 500-S Series

Alto-Shaam 500-S Series
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
G E N E R A L H O L D I N G G U I D E L I N E S
O P E R A T I O N
#823 INSTALLATION/ OPERATION/ SERVICE MA NUAL 13.
C
hefs, cooks and other specialized food service
personnel employ varied methods of cooking. Proper
holding temperatures for a specific food product
must be based on the moisture content of the
product, product density, volume, and proper serving
temperatures. Safe holding temperatures must also
be correlated with palatability in determining the
length of holding time for a specific product.
Halo Heat maintains the maximum amount of
product moisture content without the addition of
water, water vapor, or steam. Maintaining maximum
natural product moisture preserves the natural flavor
of the product and provides a more genuine taste. In
addition to product moisture retention, the gentle
properties of Halo Heat maintain a consistent
temperature throughout the cabinet without the
necessity of a heat distribution fan, thereby
preventing further moisture loss due to evaporation
or dehydration.
When product is removed from a high temperature
cooking environment for immediate transfer into
equipment with the lower temperature required for
hot food holding, condensation can form on the
outside of the product and on the inside of plastic
containers used in self-service applications.
Allowing the product to release the initial steam and
heat produced by high temperature cooking can
alleviate this condition. To preserve the safety and
quality of freshly cooked foods however, a maximum
of 1 to 2 minutes must be the only time period
allowed for the initial heat to be released from the
product.
Most Halo Heat holding equipment is provided with
a thermostat control between 60° and 200°F
(16° to 93°C). If the unit is equipped with vents,
close the vents for moist holding and open the vents
for crisp holding.
If the unit is equipped with a thermostat indicating a
range of between 1 and 10, use a metal-stemmed
indicating thermometer to measure the internal
temperature of the product(s) being held. Adjust the
thermostat setting to achieve the best overall setting
based on internal product temperature.
H O L D I N G T E M P E R A T U R E R A N G E
MEAT FAHRENHEIT CELSIUS
BEEF ROAST Rare 140°F 60°C
B
EEF ROAST Med/Well Done 160°F 71°C
BEEF BRISKET 160° 175°F 71° 79°C
CORN BEEF 160° 175°F 71° 79°C
P
ASTRAMI 160° 175°F 71° 79°C
PRIME RIB Rare 140°F 60°C
STEAKS Broiled/Fried 140° 160°F 60° 71°C
R
IBS Beef or Pork 160°F 71°C
VEAL 160° 175°F 71° 79°C
HAM 160° 175°F 71° 79°C
P
ORK 160° 175°F 71° 79°C
L
AMB 160° 175°F 71° 79°C
POULTRY
CHICKEN Fried/Baked 160° 175°F 71° 79°C
D
UCK 160° 175°F 71° 79°C
TURKEY 160° 175°F 71° 79°C
GENERAL 160° 175°F 71° 79°C
F
ISH/SEAFOOD
FISH Baked/Fried 160° 175°F 71° 79°C
LOBSTER 160° 175°F 71° 79°C
S
HRIMP Fried 160° 175°F 71° 79°C
BAKED GOODS
BREADS/ROLLS 120° 140°F 49° 60°C
MISCELLANEOUS
CASSEROLES 160° 175°F 71° 79°C
DOUGH Proofing 80° 100°F 27° 38°C
EGGS Fried 150° 160°F 66° 71°C
FROZEN ENTREES 160° 175°F 71° 79°C
HORS D'OEUVRES 160° 180°F 71° 82°C
PASTA 160° 180°F 71° 82°C
PIZZA 160° 180°F 71° 82°C
POTATOES 180°F 82°C
PLATED MEALS 180°F 82°C
SAUCES 140° 200°F 60° 93°C
SOUP 140° 200°F 60° 93°C
VEGETABLES 160° 175°F 71° 79°C
The holding temperatures listed are suggested guidelines only.

Other manuals for Alto-Shaam 500-S Series

Related product manuals