Alto-Shaam AR-7E

ELECTRIC ROTISSERIE AR-7E
D U E TO O N G O I N G P R O D U C T D E V E L O P M EN T, S PE CI FI C AT I O NS A RE S U B J E CT T O C HA NG E W I T H O U T N O T IC E.P R I NT E D IN U . S . A . #5 2 - 0 7/ 07
W164 N9221 Water Street • PO Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: 262.251.3800 • 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 • 800.329.8744 U.S.A. ONLY
WEBSITE: www.alto-shaam.com
®
OP T I O N S & A C C E S SO R I E S
■■
Casters, 5" (127mm) 4007
■■
D
oor Handle,
NON-CONTROL SIDE H
D-26900
■■
Drip Pan with drain 5001094
■■
Feet, Rubber, 2" (51mm) CE ONLY 5001614
Legs
■■
Legs, 4" (102mm) Assembly 5001765
■■
Legs, 6" (152mm) Assembly 5001414
■■
Legs, 6" (152mm) Assembly, flanged feet 5001761
■■
Multi-Purpose Wire Basket (.50 dia. pin) BS-26019
Spits
■■
Angled Spit, Stainless Steel SI-25934
■■
Piercing Spit, Stainless Steel SI-25729
■■
Turkey Spit, Stainless Steel SI-26980
■■
Angled Spit, Teflon Coated 5001335
Stacking Assembly
■■
AR-7E over AR-7E 5006291
■■
AR-7E over AR-7H NONE REQUIRED
Stand, Stainless Steel
■■
With Storage Shelf FR-26550
■■
Open (AR-7E over 750-S) 5002058
Teflon® Coated Accessories - COMMERCIAL GRADE
■■
INCLUDES DISKS, DRIP TRAY AND 7 ANGLED SPITS 5001302
STAC K I N G C OM B I N AT I ON S
AR-7VH ventless hood over AR-7E rotisserie
Requires 4" (102mm) legs for counter top applications. Free standing floor
installations require 6" (152mm) leg assembly 5001414 or 5" (127mm) casters 4007.
HxWxD = 54-7/16" x 38-1/16" x 34-1/2" (1384mm x 966mm x 876mm)
AR-7E rotisserie over AR-7E rotisserie
Requires 6" (152mm) leg assembly 5001414 or 5" (127mm) casters 4007
and stacking assembly 5006291 for applications within the United States.
Applications outside the U.S. requires 6" (152mm) legs with flanged feet 5001761
bolted to the floor.
HxWxD = 76-3/4" x 38-1/16" x 34-1/2" (1950mm x 966mm x 876mm)
AR-7E rotisserie over AR-7H companion holding cabinet
Requires 6" (152mm) leg assembly 5001414 or 5" (127mm) casters 4007 for
applications within the United States. Applications outside the U.S. requires
6" (152mm) legs with flanged feet 5001761 bolted to the floor.
HxWxD = 76-3/4" x 38-1/16" x 34-1/2" (1950mm x 966mm x 876mm)
AR-7VH ventless hood over AR-7E rotisserie over AR-7H companion holding cabinet
Requires 6" (152mm) legs with flanged feet 5001761 bolted to the floor.
HxWxD = 90-11/16" x 38-1/16" x 34-1/2" (2304mm x 966mm x 876mm)
STACKING COMBINATION
AR-7VH VENTLESS HOOD OVER
AR-7E ROTISSERIE OVER
AR-7H COMPANION HOLDING CABINET
STAN D A R D A CC E S S O R IES
●
Seven (7) removable stainless steel angled spits
●
One (1) removable stainless steel drip pan, 2" (51mm) deep
●
Two (2) removable stainless steel angled drip strips
●
Six (6) 20 watt recessed bulbs