Alto-Shaam Quickchiller QC-20 User Manual

#8405 — QUICKCHILLER INSTALLATION, OPERATION, AND MAINTENANCE
Pg. 16.
Starting from the O FF position,
press the power key
O
N
.
The Alto-Shaam name will illuminate and
SELECT MODE, PRESETS, or PROGRAM
will appear in the display. The compressor
will become energized and will begin to
operate if required by the sensors.
Press the HARD CHILL key.
The display will indicate the last operator set
internal compartment temperature.
To change the displayed temperature, press the up
or down arrow key to increase or decrease the
temperature displayed within the parameters of the
Hard Chill mode.
Press the START/STOP key.
The Display will require the operator to select
between chilling by PROBE or by TIME.
S
elect the desired Hard Chill method by
pressing the right or left arrow keys.
After the selection has been made, press the
START/STOP key.
NOTE: MODIFIED COMPARTMENT TEMPERATURE IS NOT
STORED OR SAVED UNTIL THE START BUTTON IS
PRESSED TO BEGIN QUICKCHILLER OPERATION
.
1.
3.
4.
HARD CHILL
2.
®
OPERATION

Alto-Shaam Quickchiller QC-20 Specifications

General

Brand	Alto-Shaam
Model	Quickchiller QC-20
Category	Chiller
Language	English