7
Operating instructions GB
4. Spray handle - accessories
Clean nipple of any impurities each time
the spray lance has been dismounted.
Pull forward the grey quick coupling trigger (1) of the spray handle Insert the nipple of the spray lance (2) in
the quick coupling and release the trigger.
Pul forward the spray lance or any other accessory to ensure correct mounting before starting the cleaner.
Max. thrust of spray handle and lance - see section »1.2 Technical data«.
3.2 Starting-up
Check oil.
Turn to position "Start"
Check that the oil level in the oil glass is between the MIN. and the MAX. markings (2). Turn the red start/
stop button (1) to position Start (when releasing the button it will go back to position 1 = operation).
Automatic start/stop
When the spray handle is released, the machine will automatically stop after approximately 10 sec.
The machine can be restarted just by activating the spray handle or by turning the start/stop button (1) to
position Start.
1
2
1
2
To Next Page
Loading...