Alto 3DS User Manual

3DS
Operator's
Manual
Form No. 74845A 3/01 AMERICAN SANDERS TECHNOLOGY Printed in the U.S.A.
READ THIS BOOK
This book has important information for the use and safe operation of this machine. Failure to read this
book prior to operating or attempting any service or maintenance procedure to your ALTO machine could
result in injury to you or to other personnel; damage to the machine or to other property could occur as
well. You must have training in the operation of this machine before using it. If you cannot read English,
have this manual explained fully before attempting to operate this machine.
Si Ud. o sus operadores no pueden leer el Inglés, se hagan explicar este manual completamente antes
de tratar el manejo o servicio de esta máquina.
All directions given in this book are as seen from the operator’s position at the rear of the machine.
For new books write to: ALTO U.S. Inc., 2100 Highway 265, Springdale, Arkansas 72764.
Order Parts Here:
www.ivie-ent.com/parts
Ph:(918)254-5161

Alto 3DS Specifications

General

Brand	Alto
Model	3DS
Category	Sander
Language	English

Summary

Operator Safety Instructions

Explanation of Hazard Symbols

Explains symbols used for warnings and hazards on the machine and in the manual.

Introduction & Machine Specifications

Grounding Instructions - 230 Volt

Extension Cords

Guidelines for using extension cords with the machine to prevent damage and ensure safety.

Machine Breakdown/Transportation

How to Move Machine (Room to Room)

Instructions for moving the machine over short distances within a room.

Machine Setup

Installing or Replacing Sandpaper/Screen/Pad

Procedure for installing new or replacing worn sandpaper, screen, or pad on the machine.

Operating Instructions - Sanding

Maintenance

User Maintenance

Routine maintenance tasks performed by the user, including paper bag replacement.

Service Maintenance

Scheduled maintenance tasks requiring professional service, including component checks.