Need help?Do you have a question about the Alto AS-H60Y and is the answer not in the manual?
Proper placement and clearance requirements for the heat pump unit to ensure optimal operation and safety.
Guide to setting the desired swimming pool water temperature using the control panel buttons.
Setting the temperature differential (F1) for heating mode to control unit start/stop cycles.
Selecting the operating mode (F4) for the heat pump, including cooling and heating.
Understanding the pressure meter readings (green/red areas) to assess water flow and refrigerant status.
Indicates a malfunction in the water temperature sensor.
Indicates a malfunction in the tube sensor; contact dealer for assistance.
Indicates lack of water flow or faulty flow switch; check filter and suction lines.
Indicates high water/refrigerant pressure activating the high limit pressure switch.
Procedure to follow and information to prepare for diagnosing and resolving heat pump faults.
To Next Page
General