13
Accessories EN
Brushes For cars and other surfaces.
Available in more shapes.
Tube cleaner 15 m long tube cleaner for the
cleaning of tubes and drains.
Water-sand- For removal of paint and rust.
blasting equipment Sand available from do-it-
yourself shops.
Patio Cleaner Equipment for quick and
regular cleaning of horisontal
and vertical surfaces (tiles
etc.).
Detergents
Stone & Wood For fl agstones, brick- and
Clean er woodwork.
Suitable for moss og algae.
Plastic Cleaner For plastic and synthetic
materials such as garden
furniture.
Metal Clean er For cleaning of metal such as
gar den tools.
Car Combi Clean er For cars etc. With rinsing wax.
Alu Clean er For surfaces of aluminium.
Applied with an atomizer.
Oil & Grease For cleaning of grease and
Cleaner oil on motors for instance.
Applied with an atomizer.
4.0 Main te nance EN
WARN ING! Always disconnect the plug from the
sock et pri or to maintenance or clean ing.
To ensure a long and problem free work ing life,
please take the following advice:
Wash out water hose, high pressure hose, spray
lance and accessories before mount ing.
Clean the connectors of dust and sand.
Any repair should always be made in an authorised
workshop with original spare parts.
4.1 Clean ing of nozzle
A clog ging up in the nozzle causes a pump pres-
sure which is too high. This is why clean ing is re-
quired immediately.
1. Stop the machine and disconnect the nozzle.
2. Clean the nozzle with the enclosed cleaning
needle. IMPORTANT: The cleaning tool should
only be used when the spray lance is detached!
3. Flush the spray lance backwards with wa ter.
4.2 Cleaning of water inlet fi lter
Clean the water inlet fi lter regularly once a month or
more frequently according to use. Carefully loosen
the fi lter and clean it. Check that it is intact before
re-mount ing it.
The inlet fi lter must always be fi tted inside the water
inlet pipe to fi lter out sand, lime stone and other
impurities, as they will damage the pump valves.
CAUTION: Failure to fi t the fi lter will invalidate the
guarantee.
4.3 Cleaning of machine vents
The machine should be kept clean so as to let cool-
ing air pass freely trhough the ma chine vents.
To Next Page
Loading...
Need help?
General
